• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by Andre van Greunen

  1. A

    CAT 140H grader

    Thanks Nige Customer gave me wrong info for studs and nuts
  2. A

    CAT 140H grader

    Hi Nige I need partnumbers for front wheel studs, washers and nuts 140H grader please. I dont pic it up on SIS or CAT parts lookup.. Serial number 5HM03095
  3. A

    CAT 621G slagpot carrier

    Hi Nige The transmission was installed. My foreman went to do the commissioning. First complant oil pressure too high. Could you please send me the transmission testing procedure with pressure specs for prefix DBB.
  4. A

    CAT 621G Slagpot carrier

    Kress machine
  5. A

    CAT 621G Slagpot carrier

    I have a CAT 621G slagpot carrier, transmission needs to be rebuilt. Need repair manual please.
  6. A

    D7R parkbrake not releasing

    The whole system is contaminated, the fine particles go into the valveblock, spools get stuck and the orifices block up. Yes its a big job to remove and strip trans, torque converter pump and cooler and proper cleaning. Otherwise you will have endless problems, flushing the system wont help
  7. A

    D7R parkbrake not releasing

    Non metalic debri is from clutch material. Did you check the filter, cut it open and check. I suspect clutch slippage. You can check pressures but its no use if you have debri transmission out strip and check.
  8. A

    D7R parkbrake not releasing

    Remove the screen, check for debri, metal and clutch material. Remove filter cut open check for metal and clutch material. If you find any debri, remove, transmission, torque converter, pump, oilcooler and pipes...... Strip and rebuild.
  9. A

    Hitachi EH11100 Dump truck

    Unfortunately the machine is in a remote area. Sensors get used for other dumpers by the techs on site for testing. So its a difficult situation, I have no control of. A dumper thats running needs to park to rob sensors back and test the one with the shift problem.
  10. A

    Hitachi EH11100 Dump truck

    A stalltest was done and stall speed was 1500rpm. Sounds too low. The transmission does not upshift from 1st gear, code 2214. Chasing ghosts until I can get the true spec No load engine is 2100 rpm
  11. A

    Hitachi EH11100 Dump truck

    What is the stall speed for Hitachi EH1100-3? Engine: MTU 12V2000 Transmission: Allison H6610A
  12. A

    Dresta dozer not starting

    Its got an electric pumo running 30Sec before trying to start. Got fuel coming out on the return to tank when cranking, no bubbles in the fuel. Cummins quickserve is not for free you pay now for everything and issues cant register no option. Page go to error
  13. A

    Dresta dozer not starting

    I have a Dresta dozer to troubleshoot engine not starting. Cummins QSX15. Engine was running and stopped. Prime the system, got electric pump selfpriming, fuel coming out of the return to tank. Any ideas where to look, Cummins experts please help!!!
  14. A

    D7R parkbrake not releasing

    Yes been down that road. What keeps you busy, no time to retire?
  15. A

    D7R parkbrake not releasing

    400psi measure it on the priority valve tap on the transmission housing, thats what the brakes need to release once the parkbrake is off. Sounds familiar hey Nige?
See more
Top