• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by aidank

  1. A

    Transmission pressure light flashing between forward and reverse

    my thoughts exactly
  2. A

    Transmission pressure light flashing between forward and reverse

    yes perfectly clean question the oil is sucked up by the charge pump from the sump of the transmission, therefore am I correct when I say there must be a pipe from the suction screen to the charge pump
  3. A

    Transmission pressure light flashing between forward and reverse

    thanks for the suggestions, Apologies in advance Im not v familiar with these transmissions, how do I check the pressure switch, measure the resistance across the terminals is it Ill have to get out the pressure gauge to measure the actual pressure which the transmission is giving out...
  4. A

    Transmission pressure light flashing between forward and reverse

    its a Volvo filter oil thats in it is 10w 30 transmission oil...
  5. A

    Transmission pressure light flashing between forward and reverse

    I don't think I do tbh, should the light go out instantly on startup
  6. A

    Transmission pressure light flashing between forward and reverse

    I should have also added it's same transmission as a JCB 410
  7. A

    Transmission pressure light flashing between forward and reverse

    Quick question for the more knowledgeable than me. Our Volvo l30 bm with Clark 18000 transmission is flashing the transmission pressure light when changing between forward and reverse. It just flashes for .25 seconds when you pull the lever to change between the two. No problems when...
  8. A

    volvo hub seals

    I don't need any seals for now but are you a dealer I might need something soon, do you have any brake calliper seals ? whats your email and I will keep it for future use
  9. A

    ID my seal

    I think thats the same seal as I am talking about, I got it from volvo at the time but it was v expensive. Please send me an email and I will send you on the details that I have you might have to go to the manufacturer in Brazil for the seal
  10. A

    L350

    she looks only good for being melted down for scrap from the photos what you going to do with it if you don't mind me asking
  11. A

    Volvo in a rush

    had an Englishman living next door to me what a while who had never seen silage before be interesting to see what the amerian cousins have to say
  12. A

    ID my seal

    evening all, need some help Id'ing a seal as it is leaking and local shop can't source it, said I would try on here as a last a chance Seal OD 140mm seal Id to outside of seat 108mm seal Id to inside of seat 106.8mm seal thickness frount to back 14.8mm material of construction...
  13. A

    volvo hub seals

    wasn't quite the correct seal so back to square one
  14. A

    Volvo L50C hydrastatic motor manufacture?

    yet another link http://www.sewlparts.com/Information.aspx
  15. A

    Help Finding WABCO Hydraulic Brake valve for Wheel Loader

    older volvos also used Wabco brake valves our L30 BM has a wabco valve starts with 477
See more
Top