• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by ac45

  1. A

    Case 1840 seat switch shut down /rough running

    I recently aquired a late model case 1840 this is the EC model woth the Inline injection pump. This machine has the seat switch. It will not stay running unless you are sitting in the seat. you can start it outsied the machine but it will start then die. If you ge tout of it with it running it...
  2. A

    1992 john deere 410d hydraulic pump destroked solenoid

    This is on a 410d backhoe, it cranks hard to start, if you pull back on the loader valve handle it spins over and starts fine. I took a look at the hydraulic pump destroke solenoid and it looks like it has been un plugged for 10 years or better, I cleaned the connectors up and plugged it back in...
  3. A

    johnd deere 310D parking brake not releasing

    I'm having an issue with the parking brake not realeasing all the time, and then sometimes it seems to come on when you are using the machine. Is there any way to bypass it? It looks as if it uses hydraulic pressure and a cylinder of sorts to move the rod to relase the brake? This is what it...
  4. A

    1991 John deere 310D trans issue

    Your transmission was acting as mine was from your alternator not working? or just your alternator wasnt working?
  5. A

    1991 John deere 310D trans issue

    Got a new to me machine, thinking the tourqe convertor/ reverser is bad but I wanted info on troubleshooting. Issue is that it will barely pull its self up trailer in 1st. when you start it up everything is fine but you drive a littel bit and the stop lamp starts flashing, even on level...
  6. A

    deere 310c Main boom cylinder hose

    I'm looking at a machine that has the main boom cylinder hose blown. It looks like you have to pull the whole cylinder to access the hose? The hose is the hose that extends the cylinder or raises the machine, or moves the boom down. It leaks bad if it is under much pressure. It blew when a...
  7. A

    Bobcat 773F fan belt tensioner

    The tensioner doesn't hold constant tension, wherever I push it to it stops, gotta be a tensioner issue
  8. A

    Bobcat 773F fan belt tensioner

    My belt will slip under high speed, checked tensioner, and it doesn’t have much resistance I can push the pulley in and out. Is it maybe a broken spring? How do I remove, is it the ¼ inch allen bolt that appears to go through it. It is very tight, didn’t want o break it, Any experience on this?
  9. A

    1845C hydraulic issue

    bump this back up 2 the top
  10. A

    1845C hydraulic issue

    I have an issue with the hydraulics on my 1845C. The raise on the boom and the bucket tilt up are slow. They also wont lift much weight with these 2 functions, but the bucket tilt down and the lower boom down are the speed you would expect and the hydraulic power is good, it willr aise the...
  11. A

    1845C fuel gelled? or frozen up?

    I thought maybe someone may have some insight to a pump/ fuel problem I had this weekend. It was about 20 degrees out and i had been using the machine for about 15 minutes. it then started to slow down like it was running out of fuel then it would rev up. it continued this for a few minutes...
  12. A

    Bobcat 763 hydrualics wont raise

    I have a new to me 763 f and it has the foot brake that has a switch and wires going to it. Sometimes the boom and bucket won't operate, and if i wiggle the wiring to the foot brake it will work. This has become very annoying. Does anyone have a wiring diagram or a way to disable this feature.
  13. A

    580 E gear shifter

    On my new to me 580E the gear shifter will spin around, it will go in gear , but seems like it will ride up like a retaining snap ring is gone. I was fooling around with it and the shifter almost pulled out now it seems as if it wont go back inot gear. I have seen similiar issues on old tractors...
  14. A

    580SE brakes

    I just picked up a 580se that doesnt have any brake on the left side, pedal goes down without resistance, does this have a master cylinder set up or is it mechanical. If so where is it located. Any info appreciated.
  15. A

    1989 Case 580K 4x4

    Runs works and looks good ,Cab, 5500 hours, good rubber, 2 ft bucket $16800 Located in Southern Indiana 812 5two8 7718
See more
Top