• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by 96_Bear

  1. 9

    Question about fluids

    I totally agree, busted a fitting needed 5 gallon to get level back in operating range. Used the 303, trying to figure out if whole system needs drained now?
  2. 9

    Question about fluids

    Can you use the sus 303 hydraulic fluid in the case 680ck? I know the current fluid in use in my machine is the Napa 85-105 fluid?
  3. 9

    Stabilizer?

    Brews4Me, if you have a walmart close by they should sell K1 on the shelf. I have used it to to thin out veggie oil that I ran in my powerstroke and I can say a little goes a long way to "cutting" the fuel and lowering the gel point for #2.
  4. 9

    Pictures of your Backhoe!!!!!

    Here is a picture of mine. She is ugly on the outside, but all new and shiny on the inside!Since the picture was taken I have put the headlights and grill back on.
  5. 9

    How to Shift Case 680G

    LOL digger I use mine all the time I just use the brake like a clutch and know if I have the RPM's up she is gonna buck! The only time mine gets me is when I am on a slope and the short pause from release to engage has caused me to uhh "pucker" and cut a hole in the seat cover once or twice!:lmao
  6. 9

    Old man work? No.....he's with MSHA

    I to understand MSHA and a I do see there point from some of the things I now deal with FDA and NFPA. The first truck/trailer I ever worked on was the Monday Night Football truck. Was just a little company out of Sunbury Ohio. Not sure if I am allowed to post the link but the first part of the...
  7. 9

    Old man work? No.....he's with MSHA

    I use to build remote television site trucks. We made the boxes and lengthened frames all the time. We added tag axles, and even did slide outs for under 25GVWR and up to 53 foot box trailers. We did a weld in frame for the length, then an inlay and over lay bolted in. The only modification we...
  8. 9

    Solenoid voltage on a John Deere Series 500

    I thought this was still 12 volt system not 24.
  9. 9

    Case 680CK 301B block heater and glow plug

    Got the hoe up and running! I am starting to compile all the after market/Napa numbers that I can get crossed over or parts matched. Does any one know where or what part number the rubber boots that goes over the plunger on the treadle pedals are? I have found numbers but, Napa cant get anything...
  10. 9

    Case 680 won't start

    Even with my pump being out 31 degree's my would fire and run with ether. I wonder if since it did sit so long if mice didn't build a nest inside air cleaner or intake manifold. I had to remove mine and get a nest out of it before I fired it up.
  11. 9

    Case 680CK 301B block heater and glow plug

    Mine is leaking at the plug and heater. Made quite the fireworks show when I plugged it in. Before the rebuild it always started with the block heater plugged in. Just trying to fix up all the little things I have put off for too long.
  12. 9

    Case 680CK 301B block heater and glow plug

    Still trying to get it out of the manifold without breaking anything. Doesn't appear to work when I did jumper it from the starter lug to heater.
  13. 9

    Case 680CK 301B block heater and glow plug

    Tinkerer, I never have gotten the plug to work yet. Am replacing components that are "iffy" as I find them. I will have to check on the manifold flange size Lantraxco. I am going to drain the coolant tomorrow and replace the malfunctioning thermostat and the block heater while I have it...
  14. 9

    Case 680CK 301B block heater and glow plug

    Anyone have any luck getting a replacement heater for their machine? I have found a few that might work. First is an ER-A182017, Second is from Kats KAT 30603. Any suggestions or other places to look. Also any one have any luck with the air heater(glow plug) for a replacement would be great to!
  15. 9

    Case 680 E Air Brake Trouble

    Thanks for the tip Tinkerer I will try the adding air to see if that helps. After checking air loss,1 hour later and I had only lost 20#'s of air pressure. So once I get the air chamber replaced I should have this old machine going good!:drinkup
See more
Top