• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by 90plow

  1. 90plow

    Cat 316e no hydraulics

    My “mechanic” decided to pull the fuse and put in the fuel pump but didn’t replace it. So the fuse was simply missing.
  2. 90plow

    Cat 316e no hydraulics

    Well sometimes the solution isn’t too bad. Found a bad fuel pump thanks to a blown fuse. Traced my problem Back to the hydraulic lockout solenoid thanks to help from Nige. I swapped it with another solenoid and the machine moved just like normal. Thanks for the help guys keep at it.
  3. 90plow

    Cat 316e no hydraulics

    Schematic would be great! Cat 316 0316ek yzz00212 been going through fuses one by one
  4. 90plow

    Cat 316e no hydraulics

    So I’m deep diving on the web as much as possible. Pilot pump failure and pilot solenoid failure are solely hydraulic issues. My issue seems to be electrical since I have no read outs on certain items and the dead give away to me was the horn not working. Long day ahead of me tomorrow before I...
  5. 90plow

    Cat 316e no hydraulics

    The components out pits should be reading on this monitor correct?
  6. 90plow

    Cat 316e no hydraulics

    I went again today to run through and try to figure this out. first picture is a new code I hadn’t seen before Second is the ecm readings showing none which is weird Third is another code. Also the horn isn’t working When I push thumb controls on the left hand side the motor bogs down...
  7. 90plow

    Cat 316e no hydraulics

  8. 90plow

    Cat 316e no hydraulics

    My cat 316e was running fine when out of the blue the hydraulic functions all stopped. so far we have: Checked pilot pressure and it’s got pressure via the display Checked and changed the hydraulic kill switch Checked wire harnesses for cut wires No luck on anything. Please help
  9. 90plow

    Day cab with tag trailer

    I m not looking for a shorter truck just lighter and more hp. My truck is going out with a full time driver starting Monday so I won’t have a truck to move equipment if he’s busy.
  10. 90plow

    Day cab with tag trailer

  11. 90plow

    Day cab with tag trailer

    I figured with the Tri axle trailer I should be able to balance the load pretty well. I would never buy a single axle tractor it would be a tandem axle truck with Tri axle trailer. borrowed a friends tractor to take the 14 hour round trip took a picture at the shop when I got back
  12. 90plow

    Day cab with tag trailer

    I’ve been kicking around the idea of a cheap day cab tractor with big hp to tow my tag trailer rather than the tandem. The tandem weighs 31k empty so it’s a bit slow with the added weight of the trailer and machines. Any thoughts against the tractor with a pintle? And no I don’t want a low boy...
  13. 90plow

    Overload of the Day

    Svl 95 and cat 312
  14. 90plow

    people with micro excavators

  15. 90plow

    people with micro excavators

    Bought a micro fleet last month. I had about a months worth of work for myself and want to start renting them out to other contractors. These two are so effective together.
Top