• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by 86Marlboro

  1. 86Marlboro

    D6N XL 590-9 247-9 Codes No Communication to ECM

    https://ebay.us/m/Lppswt Here's one that's similar. Obviously nicer than mine but exact same concept.
  2. 86Marlboro

    D6N XL 590-9 247-9 Codes No Communication to ECM

    Yes, with an on off switch. The sell some on the internet I'll try to find one so you'll have an idea. I'm sure there's a thread on here on how to make one. @Nige is probably the guy to have that thread ready.
  3. 86Marlboro

    D6N XL 590-9 247-9 Codes No Communication to ECM

    Possibly, mine was a bad ground connection on the engine block. That fixed my issue. I tell you what you can do and I have done in the past. Create a harness that will power up the Engine ECU by itself and then start the machine. You'll get some wonky codes because the CAN data is disconnected...
  4. 86Marlboro

    Volvo contronic tool

    Will send you a PM with details!
  5. 86Marlboro

    Volvo contronic tool

    Do you still have this? I'd like to buy.
  6. 86Marlboro

    Mack GU713 J1708 Issues

  7. 86Marlboro

    Mack GU713 J1708 Issues

    Working on a 2012 Mack GU713 SN: 1M2AX04Y4CM011138. I had some comm issues, where I couldn't connect to the ECM via JPRO or PTT. Made a bench harness to verify integrity of the ECM and it connected flawlessly. Therefore, my issue is in the wires. I have measured and checked the voltage in my...
  8. 86Marlboro

    Mack MP7 ECM Flash

    Needing someone to flash a MP7 ECM for me. Have multiple to do too if interested. Any suggestions, prefer it to be reasonably priced?
  9. 86Marlboro

    2012 GU713 1587/Data Link Issues

    I have a 2012 Mack GU713 VIN#: 1M2AX04Y4CM011138. I cannot connect to the J1587 data link communications. I can get into the J1939 however. I have checked the respective fuses and voltages on the comm port. My J1587+/- wires ohm out together showing connection, I have 1.5 V on my + and almost...
  10. 86Marlboro

    D6N XE 2240-5

    Sorry, got to work this morning and figured out I was vastly misinformed. It was on a D6N XL SN: PBA02880 and it was also throwing a 2241-5 and 1198-5 code. Has lost all blade function as well. Apologize for jumping this gun, just trying to get a jump start on the week.
  11. 86Marlboro

    D6N XE 2240-5

    Sorry, forgot to put in initial post. SN is *CAT000D6THMH01026*.
  12. 86Marlboro

    D6N XE 2240-5

    Company I work for just bought a used 2021 D6XE. Newest machine we own now, and they ran it yesterday and Friday before putting it on a job. Yesterday it threw a 2240-5 Blade Fault code. Said the blade quit functioning. My 2023A ET won't connect to the ECU's, and can't find anything on SIS. Any...
  13. 86Marlboro

    GU713 Mack Needing Jake flashed on ECU

    I've got a 2012 GU713 Mack w/ the MP7 in it. The engine ECM gave out, and we replaced it with another from a garbage truck off an MP7. But, it doesn't have a Jake Brake on it or the same HP the original did. Looking for someone to flash it for me. May be able to get original flash file from old...
  14. 86Marlboro

    MP7 Bench Harness

    Anybody have a pinout for a Mack MP7 engine ECU and diagnostic port? Trying to make a bench harness to flash/download a couple ecms we have. Not having any luck online finding anything?
    • 86Marlboro
    • Thread
    • bench harness mack mp7 wiring wiring diagram
    • Replies: 0
    • Forum: Trucks
  15. 86Marlboro

    D6N XL 590-9 247-9 Codes No Communication to ECM

    This is my first post, so give me some grace. I have a 2015 D6N XL LGP S/N: PBA02881. Had a steering rotary motor go bad and changed it Saturday. Fixed my steering issue, while testing it out cut it off to talk to another guy with me. Went to start it back and it would crank but not start...
    • 86Marlboro
    • Thread
    • can data cat data crank no start d6n ecm ecm j1939
    • Replies: 16
    • Forum: Dozers
See more
Top