• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by 51kw

  1. 5

    HD20 help

    Has anyone here been into a HD20 torque converter? Have one that is gushing fuel from the front seal. I know the seals are NLA but I have another very weak but dry torque to pull seals from, The book says there are special tool needed to work on them. Just wondering if there are any tips or...
    • 51kw
    • Thread
    • Replies: 1
    • Forum: Dozers
  2. 5

    Tire help.

    Thanks Delmer, Called Liberty tire and they don't have anything that size. But he is on the hunt also, calling his connections.
  3. 5

    Tire help.

    We have been calling and knocking on doors. Just thought I would see if by chance someone may have one or two.
  4. 5

    Tire help.

    Good friend is looking for a good used set of 21x29 tires for a Bucyrus erie scraper. It is only used for 10hrs a year at a show. The rear two he has have rotten sidewalls. Cant justify $7000 each for two new ones.
  5. 5

    D6c cat loss of oil pressure

    Any videos of it working yet?
  6. 5

    D6c cat loss of oil pressure

    CalvinJim I agree, you did it in point 4, post 853. I would be very meticulous in checking that head and block for cracks after this overheat. Also checking for warpage. Steve, As was stated earlier. Make sure the warranty and all the conditions and clauses are spelled out, explained and...
  7. 5

    D6c cat loss of oil pressure

    Birken, It does explain it very well. The head having no coolant was nuclear hot, which explains the valves that were warped. But the block having coolant in it was much cooler, which is why the pistons did not look that bad.
  8. 5

    D6c cat loss of oil pressure

    I have a feeling that reman engine just had a set of rings installed and sent out the door. Sleeves were never replaced.
  9. 5

    D6c cat loss of oil pressure

    It is readable now. Looks like a very complete analysis was done.
  10. 5

    D6c cat loss of oil pressure

    They are still blurry.
  11. 5

    D6c cat loss of oil pressure

    That's awesome!!! Arent you glad you didn't just roll over with their first offer?
  12. 5

    D6c cat loss of oil pressure

    Meeting must not have went well. No news yet.
  13. 5

    D6c cat loss of oil pressure

    Come on Steve, we are all on the edge of our seats waiting for the latest Zeigler lies.
  14. 5

    D6c cat loss of oil pressure

    Steve, I have seen some very coolant related overheated engines and NEVER seen a melted valve! A melted valve would HAVE to be caused by combustion temps extremely high. Again their story is NOT jiveing with the symptoms!!!!
  15. 5

    D6c cat loss of oil pressure

    I agree with you on the failure issue Steve. In reference to the Wesj post you quoted. I don't remember you mentioning a burned up valve?
See more
Top