• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by 1fastmofo

  1. 1

    T190 troubles

    What I though was oil coming from the top of the injection housing looks like it's comeing from the intake, so it's either a valvtrain/head issue or compression correct? Because I only see it on one intake bellow
  2. 1

    T190 troubles

    Turbo output side is dry, the oil leaking around the base of the injector pump mating surface has be wondering if the injectors could be injecting oil into the motor? I'm not very familiar with diesel mechanics. I'm going to buy a compression test as well. You mention a fuel issue, the electric...
  3. 1

    T190 troubles

    Machine is a 2005 the turbo outlet was facing forward of the machine instead of backward like the original turbo did, the mechanic rerouted the tube with a 90' hose, it was partially crimped off so I put another hose on it so it could get the proper air flow.
  4. 1

    T190 troubles

    Why would the turbo pickup oil?
  5. 1

    T190 troubles

    While operating the smoke is minimal... the second it's stationary it smokes heavily
  6. 1

    T190 troubles

    It's a v2403 kubota. It was a shade tree mechanic. I brought an entire engine overhaul kit. What was it wasn't done I don't know. He said the lift pump was bad. Yea it was a bad situation I'm trying to move forward with help from this board . I can't comment if it's lacking power never operated...
  7. 1

    T190 troubles

    so I paid a guy to rebuild my t190. It smokes when I pick it up. He said the fuel pump was bad so I replaced it, still smokes I noticed the turbo I bought was the wrong one the outlet faces forward, it was dumping oil in the intake, I rerouted the line so it wasn't crimped. Seemed to improve. It...
  8. 1

    Bobcat fuel pick up tube repairs

    On a t190 my drive belt shredded and broke a rubber return line for the fuel, problem is I don't know where it goes other than I assume it went to the tank...
  9. 1

    T190 coolant issues

    I appreciate your reply, I feel a lot better after reading your post thank you
  10. 1

    T190 coolant issues

    The coolant is ice cold I can stick my finger in the overflow bottle after 45 minutes of run time it should be hot, makes me think it is not circulating I assumed air however by squeezing the line running to the thermostat housing and it moving the water in the bottle makes me think air is not...
  11. 1

    T190 coolant issues

    After operating machine for about 45 minutes the coolant reservoir bottle is still cold also I'm not getting a temperature reading when I squeeze the upper radiator hose that goes to the Waterfill neck it's pushing water up into the reservoir I cannot squeeze the lower hose because it has a...
  12. 1

    bobcat t 250 low oil pressure shutdown

    Make sure drive belt on hydraulic pump isn't loose
  13. 1

    T190 rear track idler

    is there a trick to get the primary bolt off of the rear track idler, I've got my m18 Milwaukee brushless impact on it and nether side with budge, was beginning to wonder if I'm doing something wrong. Also does anyone rebuild theirs or just but the assembly new
  14. 1

    1840 case starting troubles

    same machine, life marriage kids and it got Put on the back burner slightly... get it running and sell it
  15. 1

    1840 case starting troubles

    How can I identify an "inline pump
See more
Top