• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by 01Time

  1. 01Time

    Cat 246 Intermittent Parking Brake Issue

    Just wanted to post an update on the issue...it ended up being a low battery. It had been needing to be jump started occasionally (depending on how long it sat). I replaced the battery and the issue hasn't returned. Now I need to locate the parasitic draw that's causing the battery issue.
  2. 01Time

    Cat 246 Intermittent Parking Brake Issue

    5SZ07867 (CAT00246P5SZ07867)
  3. 01Time

    Cat 246 Intermittent Parking Brake Issue

    S/N 5SZ0XXXX A couple of days ago I noticed that sometimes when I release the parking brake, the loader controls still do not work; but the drive controls do. It’s usually a series of toggling the parking brake on and off and it eventually releases all of the controls. My guess is it may be a...
  4. 01Time

    Cat 246: Repairing A Quick Attach Coupler

    To disassemble, is it just a matter of loosening and removing the nut (#13, I believe) and it will all (theoretically) come free?
  5. 01Time

    Cat 246: Repairing A Quick Attach Coupler

    S/N 5SZ0XXXX The LH coupler will not fully disengage without a decent amount of applied impact shock (mini-sledge hammer). It's been this way since I bought the machine, but it hadn't been much of an issue since I rarely changed attachments. But nowadays I do change out attachments more often...
  6. 01Time

    Cat 246: Tilt Cylinder Bushings?

    Is this something a 2" annular cutter on a magnetic drill could accomplish or does it need a true line boring machine to do?
  7. 01Time

    Cat 246: Tilt Cylinder Bushings?

    Thanks for the info...glad to see there's a solution.
  8. 01Time

    Cat 246: Tilt Cylinder Bushings?

    There is some play with some occasional 'creak' and 'pop' where the tilt cylinders connect to the bucket. Are there bushings there that I could replace to address that issue? 5SZ07867
  9. 01Time

    Cat 246 - Strange Sound w/Drive Issues

    Is there a way to specifically test for that or is that done only through visual inspection?
  10. 01Time

    Cat 246 - Strange Sound w/Drive Issues

    Is that something that would be intermittent? My machine operates normally for a few hours and for no apparent reason it begins to squeak and if I keep using it, within a couple minutes it turns into a grind, with noticeable resistance.
  11. 01Time

    Cat 246 - Strange Sound w/Drive Issues

    Thank you Nige, that info was very helpful. More than likely I will have a mechanic buddy help me. He's a diesel mechanic, but he occasionally works on construction equipment - but I don't think he's ever rebuilt one of these though. I'm assuming only the damaged/worn parts would need to be...
  12. 01Time

    Cat 246 - Strange Sound w/Drive Issues

    Ah, of course! 5SZ07867
  13. 01Time

    Cat 246 - Strange Sound w/Drive Issues

    I checked the axles and they all seemed okay. But, the issue intermittently persisted so I took it into Caterpillar. Being an intermittent problem it took a while for the symptoms to appear. But they did, and they were able to determine that the sound is coming from the left drive motor - not a...
  14. 01Time

    Cat 246 - Strange Sound w/Drive Issues

    Is there aanything I can do to confirm this? I'm assuming each wheel has its own set of bearings?
  15. 01Time

    Cat 246 - Strange Sound w/Drive Issues

    Out of nowhere my machine starts to make a noise that sounds kinda like tires squeaking on a polished concrete floor. It even sounds like it's coming from the wheel/tires - but that's clearly not what's going on. Whatever it is also affects the ability to drive it - it feels like something is...
See more
Top