• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

So I'm A idiot! Hydraulic fluid?

Bls repair

Senior Member
Joined
Jan 21, 2017
Messages
1,612
Location
S E Pa
Occupation
Equipment operator,mechanic
Just make sure the specs are the same as what is called for
 

Tinkerer

Senior Member
Joined
May 21, 2009
Messages
9,342
Location
The shore of the illinois river USA
From red power forums --->
"I dug out my Hough 30 books.You engine is a G263 IH engine. Hyd system calls for 10W motor oil and in severe service it should be 10W30 motor oil. Your brakes....front wheels adj thru slots at about 7 & 1 o'clock on backing plate.My manual shows a "star" adjusting wheel.The rear adj with cams located about 2 & 10 o'clock.Hopes this helps."
 

BillHoughH30G

Well-Known Member
Joined
Feb 9, 2020
Messages
50
Location
Lucerne Valley, California
From red power forums --->
"I dug out my Hough 30 books.You engine is a G263 IH engine. Hyd system calls for 10W motor oil and in severe service it should be 10W30 motor oil. Your brakes....front wheels adj thru slots at about 7 & 1 o'clock on backing plate.My manual shows a "star" adjusting wheel.The rear adj with cams located about 2 & 10 o'clock.Hopes this helps."
Thank you!
You gave me a starting point.
 
Top