I see i did`nt miss my 48 hr. estimate by muchToday's trailer fix, DOT caught the worn out eye late Friday afternoon.
Get a load of the rusty rear end.
Different hitch. And the dang trailer has been in the shop most of today because of wiring problems. It only had 2 rotten splices in the 7 wire from the front to the back, no grounds, and of course the mystery nick in the insulation that starts the blue powder wiring issue. Oh, I gotta put new mudflaps on it too.I see i did`nt miss my 48 hr. estimate by much
Hey RZ, how's that Hitachi grinder holding up? It looks pretty new.
I've got a couple myself, one with a couple of years on it and it's been good so I bought a 5inch the other day.
Gota 6 yr warranty with it, don't know if that is just an Australian thing but I thought it was pretty good .
Not that you need me to tell you but your fabrication skills are pretty bloody good.
Best of luck, Brett
Yeah, I'm scratching my head trying to find a master link. The strange thing is all the drive sprockets, roller chain and all... are welded on. It's one solid unit.That's an interesting drag chain setup . Wonder if they will just send you a new sprocket shaft ?
UHMW floor and walls, I bit of ice aint going to do that. It has never been loaded with any thing. The owner is pist, and again I wont do any work on it 'til the manufacturer approves or replaces the sprocket shaft.Frozen floor - ice chunks jammed in it. Been that cold by you recently? Looks like snow on the ground.
You've shamed me into fixing on one of my own trailers. I got a couple boards for the lowboy at the sawmill, when we picked up the 1" for the rollback trailer. I'm going to have to have him cut that though, he had the 1" on hand.
We had to put a steel plate on the lowboy the other day to bring the galion home. I think we'll end up redecking the lowboy too this spring.
My rollback is a "paver" edition I think. Its got plenty of stringers, I think that's the only way I got by as long as I did with the bad boards.
View attachment 194207 View attachment 194208 View attachment 194209
Wow, that almost doesn't need a deck.
View attachment 194156 View attachment 194157 Had this show up today. Brand new, very expensive compost spreader. Broken weld on the sprocket shaft. Waiting on a weld procedure and warrantee clearance to fix it.