PlumberRob
Member
Go with the heavier weight, it won't hurt and if you ever get a newer truck with a higher GVWR you will still be ok.
That was a quick reply, on the road... What I mean by that is if you get a bigger truck or trailer you will still stay under 38,000. My 20,000 gvwr GN trailer and my SRW Ram 3500(12,300gvwr), put me at 32,300 combination weight. Even the newer dualies at 14,000+- gvwr and a trailer similar to mine, you will be under that combination of 38,000.
Kubota 95 at 11,500+- + trailer 5000lbs+- + truck 9000+- = 25,500lbs(I think you will be higher then 26,000 when added up with true numbers).. What's the point of farm plates if you can't go over 26,000???
I figured the truck more around 8k. SRW Ram 2500 6.4 and the trailer weighs 3050lbs. I called Gatormade.
Well you should be all good then. Good luck with everything.
Made a deal for the SVL95-2. Going to be delivered tomorrow. Thank you everyone for your input and opinions. You were a great help.
Congrats CCW! Should be a very nice machine for you. Now you know the rules, better post some pics!
Congrats CCW! Should be a very nice machine for you. Now you know the rules, better post some pics!
Congrats....beutiful machine ! I hope you have good luck with it....
Thank you and thanks again for your help. Now I just hope I can get some time to play without it raining.
Well first you could yank out those pesky fence posts, then dig up the driveway.....
Nice rig!
Not a problem at all CCW...Loads of great folks here that are always willing to help...I'm sure you will have your chance to put it through its paces real soon... it is enclosed, if its doesn't stop raining soon....just saying !Thank you and thanks again for your help. Now I just hope I can get some time to play without it raining.
Not a problem at all CCW...Loads of great folks here that are always willing to help...I'm sure you will have your chance to put it through its paces real soon... it is enclosed, if its doesn't stop raining soon....just saying !
Enjoy your new Iron, it's a super shape machine....