chuckcastiglion
Member
I came across some posts of TMZ owners that you helped out. I'm at my whit's end and am ready to hurt something.....LOL.
I sure would appreciate some of your knowledge.
The machine is a TMZ34/19. S/N T3401-328. Electric Sch #ES0209 VIN #5D8AA19171R000328
Batteries were replaced last year. (2) motor controllers in the last 3 years which I believe was due to bad batteries.
The control boards are the original green boards.
The lift gets used very little and sits for weeks at a time in my driveway.
It was acting really bad before I changed the batteries last year. The new batteries seemed to fix the controller issues until a few days ago. The ground controls work perfectly for the time being. The basket controls are intermittent at best. Might work for a few seconds and then quit. The basket will not work at all. If I extend the basket from the ground control and then switch the key to basket control, the basket will immediately retract without pushing the down button. The other jib cylinders stay in place when the key is switched.
All functions seem to work perfectly from the ground control. Basket controls are the problem.
My machine doesn't have the error display. You mentioned that you had a computer program. Any chance it's still available?
I will be more than happy to compensate your time.
Best Regards,
Chuck Castiglione
310 Mercer Rd.
Greenville, PA. 16125
cjcastiglione@Verizon.net
724-813-2102
I sure would appreciate some of your knowledge.
The machine is a TMZ34/19. S/N T3401-328. Electric Sch #ES0209 VIN #5D8AA19171R000328
Batteries were replaced last year. (2) motor controllers in the last 3 years which I believe was due to bad batteries.
The control boards are the original green boards.
The lift gets used very little and sits for weeks at a time in my driveway.
It was acting really bad before I changed the batteries last year. The new batteries seemed to fix the controller issues until a few days ago. The ground controls work perfectly for the time being. The basket controls are intermittent at best. Might work for a few seconds and then quit. The basket will not work at all. If I extend the basket from the ground control and then switch the key to basket control, the basket will immediately retract without pushing the down button. The other jib cylinders stay in place when the key is switched.
All functions seem to work perfectly from the ground control. Basket controls are the problem.
My machine doesn't have the error display. You mentioned that you had a computer program. Any chance it's still available?
I will be more than happy to compensate your time.
Best Regards,
Chuck Castiglione
310 Mercer Rd.
Greenville, PA. 16125
cjcastiglione@Verizon.net
724-813-2102