• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Cummins N14 Celect top end

T

trackdoc

Well-Known Member
Joined
Aug 8, 2011
Messages
99
Location
Ireland/Kyrgyzstan
Occupation
Currently working as a HD Mechanic Trainer in Kyr
Hi there, I need to do a top end on an N14 celect we have in a John Deere at home.
Am I correct in saying the injectors are finger tight (6lb/inch) then slack off 2 flats (120 deg) ?
 
F

FMD

Well-Known Member
Joined
Jul 26, 2013
Messages
83
Location
somewhere
trackdoc said:
Hi there, I need to do a top end on an N14 celect we have in a John Deere at home.
Am I correct in saying the injectors are finger tight (6lb/inch) then slack off 2 flats (120 deg) ?
Click to expand...

Bottom the injectors two or three times to remove the fuel. Torque the adjusting screw to 25 inch pounds. Back off two flats. Torque the lock nut.
 
You must log in or register to reply here.
Top