wacker neuson 9503 no hydraulics

[Newbury1289]

i have a 2013 Wacker Neuson 9503 rubber tire excavator, I had a problem with the hydraulic pump that runs the travel drive that mounts to the gearbox, I still had all hydraulic functions for everything else, i had the pump sent out and rebuilt the shop said the pump was very worn due to age, i put the pump back in and everything was working great but now i lost all functions of my hydraulics and have a starting issue, i am guessing a safety tripped the only way i can get it to start is to jump the starter soloed, I have checked fuses and relays, I also keep blowing the 10 amp fuse for parking brake as soon as I put machine in travel mode, any advice would be greatly appreciated.

 

[uffex]

Good day
Do you have any schematics for the machine?
Kind regards
Uffex

 

[Newbury1289]

I do have some hydraulic schematics but a lot of the electrical pages are missing half the page when they were printed

 

[uffex]

Good day Newbury
You describe a pump to the travel gearbox, do you mean the motor?
If you can post what information you have to a Google Drive and post me the link, I will try to help out.

Kind regards
Uffex

 

[Newbury1289]

Yes it is the motor that mounts to the gear box that is for the travel drive. unfortunately all my manuals are paper copies but I will see what I can do, thank you

 

[uffex]

Good day Newbury
I will try my end, but it will help a lot if you can post those online.
Kind regards
Uffex

 

[uffex]

Good day
If you can take a photo of the motor & label, we may be able to match it up.

 

[Newbury1289]

I will send them when I get back in the shop thank you.

 

[Newbury1289]

Machine serial# is
#WNCE0603HDAL00230

 

[Newbury1289]

Good day
If you can take a photo of the motor & label, we may be able to match it up.

 

[Newbury1289]

*WNCE0603HPAL00230* is the machine serial

 

[uffex]

Could you take a photo of the transport motor, I guess it maybe a Rexwroth

 

[Newbury1289]

Could you take a photo of the transport motor, I guess it maybe a Rexwroth

 

[uffex]

Good day
I suggest you remove one of the main lines & plug the hose with a gauge > plug the open port of the motor, operate the travel, see if we have pressure. This way we can establish if the motor is good.
Kind regards
Uffex

 

[Newbury1289]

Good day
I suggest you remove one of the main lines & plug the hose with a gauge > plug the open port of the motor, operate the travel, see if we have pressure. This way we can establish if the motor is good.
Kind regards
Uffex

found a problem with the cab harness there is a short, also rocker switch for dig/travel mode needs to be replaced, estimated time for cab harness is February of 2023 and rocker switch isn't available until October

 

[uffex]

Good day
That is great news, those rocker switches are available from many outlets, you need to take the switch out and note the pin configuration.
Kind regards
Uffex

 

[Newbury1289]

thank you for the help I really appreciate it