Number 25 Cable control unit

[LG 78]

Hi everyone
I have had my newly purchase D6c and scoop working and going well but..
The CCU has been tampered with and I am needing some parts or a second unit in NZ that I can purchase
The parts that im needing are 4F2521 and 4F2348
Any help as always is greatly appreciated
4F2521 is the lever (will try to add photo
4F2348 is the adjustment rod
Could anyone tell me if these parts are the same on a number 29 ccu
Cheers

 

[Old Magnet]

4F2521 RH lever is the same
Rod is a 4H4734 on the #29

Check www.machinerytrader.com
Parts are available, even in Australia

 

[LG 78]

Once again your a legend thanks Old Magnet
Think I have found 3 #29 units free to a good home not far from me so will check them out tomorrow

 

[Old Magnet]

Nothing special about that rod that it couldn't be fabricated, Just longer on the #29.

 

[LG 78]

Found 3 #25 CCUs got the first 2 home get the 3rd another day big units to handle when they're not bolted to a tractor

 

[epirbalex]

Hi everyone
I have had my newly purchase D6c and scoop working and going well but..
The CCU has been tampered with and I am needing some parts or a second unit in NZ that I can purchase
The parts that im needing are 4F2521 and 4F2348
Any help as always is greatly appreciated
4F2521 is the lever (will try to add photo
4F2348 is the adjustment rod
Could anyone tell me if these parts are the same on a number 29 ccu
Cheers

https://www.trademe.co.nz/a/marketp...oving-machinery/bulldozers/listing/3604239417

Listed today

 

[LG 78]

Thanks for that it's awesome to know people are around to keep an eye open and to help others
It's one of the units that I picked up the other day I've been told that I don't need 3 spare units so hopefully I can help someone else out by selling one

 

[nicky 68a]

Thanks for that it's awesome to know people are around to keep an eye open and to help others
It's one of the units that I picked up the other day I've been told that I don't need 3 spare units so hopefully I can help someone else out by selling one

Hi LG 78.
Before you sell one,make sure they are absolutely 100% identical in EVERY way before selling one.In my experience of ccu’s on D8’s there are often many different configurations.They can deceive you at every turn.
You may require only one part from each of your ccu’s,but I assure you that that one part you haven’t got will have you banging your head against the wall.
Keep ALL 3.
Best regards
Nicky

 

[Old Magnet]

Best bet is to check/match actual s/n's for exact match.