• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Memories for us old truckers

Nige

Senior Member
Joined
Jun 22, 2011
Messages
29,227
Location
G..G..G..Granville.........!! Fetch your cloth.
I honestly saw the picture and thought the engine looked like a work of art. You can look at it, and form follows function = beauty, and I can determine how its mostly supposed to work.
Here's the Irish Gardner connection that will probably be more to your taste. There were lots of Garnders in the Irish fishing fleet back in the day.
https://tangentengineering.co.uk/

 
Last edited:

Truck Shop

Senior Member
Joined
Dec 7, 2015
Messages
16,871
Location
WWW.
100_1540.JPG 100_1541.JPG 100_1542.JPG A friend owns this 1951 which has sat now for 25 years. So I decided to tow it to the shop, make repairs needed
to make it run and operate safely, clean and polish, and take it to some shows. This particular 1951 was used by
Freightliner in calendar/poster ads in the early 90's IIRC. 220 Cummins with a 10spd.
 

DMiller

Senior Member
Joined
Feb 21, 2010
Messages
16,550
Location
Hermann, Missouri
Occupation
Cheap "old" Geezer
That one was New, not a lick of grease on the Lift Gearing, all the older ones I have seen in museums were so loaded with grease were like the proverbial drop pf Anti Seize, spreads EVERYWHERE. Can just imagine roads of the day in 1920, catch a rut and that Armstrong Steering could almost launch a driver over the side!!!

That solid Tire unit has been around a few blocks!,, Side panel for Engine missing, Add On too box on running board, tires show some considerable edge nicking. Gas Lamps. Bigger Gas reservoir on the Newer one!
 
  • Like
Reactions: JPV
Top