1. Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
  2. ALL NEW MEMBERS READ THIS FIRST!! Thank you for joining Heavy Equipment Forums! If you are new to forums we communicate with "Threads", please search our threads to see if your topic may have already been answered and if not then click "Post New Thread" in the appropriate forum. This will allow all of our members to see your question and give you the best chance to be answered. After you've made a number of posts you will graduate to Full Member status where you'll see a few more privileges. Following these guidelines will help make this the best resource for heavy equipment on the net. Thanks for joining us and I hope you enjoy your stay!!

New Profile Posts

  1. Bobcat Crazy
    Bobcat Crazy MarshallPowerGen
    Hi Marshall, I appreciate the "Like"! I also appreciate all you guys who take time to help others figure out issues that confound us with these awesome but complicated machines.

    Many thanks!
    B-Crazy
  2. Nige
    Nige Brent Wilson
    Try starting a thread on the subject in the Track Loaders section. Read the Rules & Posting Guidelines on the top of the main page.
  3. Brent Wilson
    Brent Wilson
    Hell can anyone tell me the year of my 951C Serial # 86J2786
  4. bibs
    bibs
    hi folks,prowd owner of cat 215 clc
  5. Spalinko
    Spalinko
    Leaving to the mine April 14, no contact till September.
  6. Ricky Kompkoff
    Ricky Kompkoff
    how do I repair the quick coupler to release the forks or bucket on a cat 420D
  7. VikingSpirit
    VikingSpirit
    Cat 3126 marine application have a problem with the Fuel pump shut off switch.
  8. Scuba steve7709
    Scuba steve7709
    Can anyone give me reviews on Teran / emaq/tasca buckets and where they are made?
  9. Puggles
    Puggles
    Getting closer to getting my jlg 40f boom lift to work. Thanks for everyones help.Still have a couple switches that just don't want to work.
  10. norman123
    norman123
    CAT D3B. 3204DI
  11. John C.
    John C.
    Post this up on the dozer thread on the main board and someone with some experience with these machines might be able to help.
  12. Tom Raney
    Tom Raney John C.
    The speed control is a lever that controls the speed for the HST transmission. There is a resistant attached that feeds back to the controller. These have to be adjusted to specification I don't understand the settings in the service manual. I have contacted komatsu service I am waiting for there reply. If I can figure out how to send you the page in the service manual I would.
  13. Tom Raney
    Tom Raney John C.
    I am having an issue when I go over half the speed control it stops moving. It will start moving again after going back to neutral.
    1. John C.
      John C.
      I think you are going to have to be a little more clear on your description of what is going on. What is the speed control? Is it a lever or dial that controls the engine? Or does it control the transmission?
      Mar 10, 2020
  14. Tom Raney
    Tom Raney John C.
    Hello John I have a Komatsu D66S1 need some help on understanding the potentiometer adjustment numbers in the service manual. It states to get the reference voltage divide by 2=2.498. Output voltage for the speed control lever neutral position. 5Vdd+/-.03 (reference)stroke end .747Vdd +.09 -.03. What should my total voltage be for each?
    1. John C.
      John C.
      I haven't had the pleasure of working on one of those machines so I'm at a loss for what you are troubleshooting. I'm guessing that you are talking about a "speed control lever neutral position." That doesn't tell me if it is a throttle control or a transmission control. I'm going to guess they are saying if the high end of the stroke shows .747 then the neutral position should be 0.37.
      Mar 9, 2020
  15. Tinkerer
    Tinkerer BILL JS200L
    I started a thread for you. In the the excavator forum.
  16. BILL JS200L
    BILL JS200L
    Does anyone know how to change the control pattern on a 2000 JCB JS200L excavator. I can't find any way except to switch hoses ?
  17. jerry D enright
    jerry D enright Cbait580b
    thank you for the info....I'll have to see what happens if the weather clears here in NY
  18. difficult machinery
    difficult machinery
    Can anyone help me to find out the year of my case 1840 skid steer with the serial number JAF0247120
  19. jerry D enright
    jerry D enright Cbait580b
    I was wondering where did you add the diesel to the engine oil, thru the valve cover or into the dipstick...and how long did you let the mixture sit? In doing this did you leave the oil drain plug off?
  20. Pep Joe
    Pep Joe
    Questing for solutions to Cat machines problems