lake side bob
Senior Member
I have this axle in inventory its an old one. Maybe from the late 1960's. I know I have had it in inventory for 25 years stored.
its a 3 inch tube with spindle on each end.
on the spindle the outer bearing diameter is 1.75 inches
on the spindle the inter bearing diameter is 2 inches
the spindle is welded to the 3 inch tube.
The hub is 8 hole with 6.5 spacing 1/2 inch 20 thread bolts
Any one have a source of information that would communicate the capacity of this axle.
its a 3 inch tube with spindle on each end.
on the spindle the outer bearing diameter is 1.75 inches
on the spindle the inter bearing diameter is 2 inches
the spindle is welded to the 3 inch tube.
The hub is 8 hole with 6.5 spacing 1/2 inch 20 thread bolts
Any one have a source of information that would communicate the capacity of this axle.