PC220-7 stalling under load and bellowing black smoke

[rockfall]

Hi guys,
I just had my hydraulic pump done. Replaced almost every inner parts along with the two solenoids. I also replaced the pilot valve but the function speed is not satisfactory. It stalls and blow black smoke. I had the air intake line cleaned.

any ideas?

Thanks

 

[John C.]

Any codes on the computer?

 

[rockfall]

No codes

 

[John C.]

Have you checked any pressures? It sounds like something didn't get put together properly.

 

[mikebramel]

So if this all started after the pump was done the pumps are not set up right?

 

[rockfall]

The smoke was there before and I have set the tracks on 380 bars and boom raise is something around 330 bars

 

[John C.]

Have you checked you load sense pressure differentials?