• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Looking to purchase (5) W2000/W2100 and (3) WR2500S

I

ibpcorp

Member
Joined
Sep 1, 2015
Messages
7
Location
New York City
Occupation
Sourcing Specialist
Good afternoon,

I am looking to purchase cold milling machinery ASAP in the US. These are going to be used on a big contract overseas and would really appreciate the help! Location doesn't matter as long as the equipment is located inside the USA.

My needs:
Wirtgen W2000 Years: 2006-11 / hours: 2000-5000
Wirtgen W2100 Years: 2006-11 / hours: 3000-6000
Wirtgen WR2500S Years: 2007-11 / hours: 2000-7000

I am looking to buy (5) units between the W2000/W2100 (either works) and (3) units of the WR2500S. I will purchase this monthly (8 units) for quite a long time.

Feel free to contact and inquire about any doubts.

Thanks!
 
digger242j

digger242j

Administrator
Joined
Oct 31, 2003
Messages
6,644
Location
Southwestern PA
Occupation
Self employed excavator
Posting the same thing in four different places on the forum, even if it's an offer to buy something, pretty much meets the definition of "spam." We frown on that.

We'll leave this one, just in case it helps out one of our members that may have one to sell, but please don't do that again.
 
I

ibpcorp

Member
Joined
Sep 1, 2015
Messages
7
Location
New York City
Occupation
Sourcing Specialist
digger242j said:
Posting the same thing in four different places on the forum, even if it's an offer to buy something, pretty much meets the definition of "spam." We frown on that.

We'll leave this one, just in case it helps out one of our members that may have one to sell, but please don't do that again.
Click to expand...

I am sorry!

No harm intended, just trying to get the word out there!

Thanks for leaving this one,

Regards
 
You must log in or register to reply here.
Top