Wondering if anyone out there has any ideas or ways of cleaning/keeping screens clean. We are using a Cedarrapids 6x20, screening with all 3 decks. We are having a problem with our bottom deck which is half 1/8" and half 3/16"(slotted)screens. The material we are in is anywhere from 6-11% moisture so that isn't helping, but don't have the time to let it dry. We have slowed production down to around 150 tph and are going down about every 30 mins to clean the screens, currently we just run a 1/2" chain down the deck while the screen is shaking to clean them. This works but was wondering if there were any other ways. We also just ordered all stainless steel screens which we are hoping will help prevent the material from sticking.
Forgot to mention top deck is 5/8" dropping to 1/4" in the middle then to the 1/8"+3/16" combo.
Forgot to mention top deck is 5/8" dropping to 1/4" in the middle then to the 1/8"+3/16" combo.
Last edited: