• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Cat 906H

marka683

Well-Known Member
Joined
Dec 1, 2015
Messages
82
Location
Chicago
Occupation
Mechanic
Drive issue hydrostatic, 906H SN CAT0906HCSDH00220 unit creeps in reverse while in neutral, very jerky when in forward or reverse, very slow drive in forward. There is a single pressure tap near the forward reverse control solenoids, pressure climbs to 120 psi max in ten seconds at wot in gear.any help would be greatly appreciated.
 

mikebramel

Senior Member
Joined
Jul 15, 2012
Messages
1,612
Location
milwaukee
A4 Rexroth? You can try adjusting adjusting the center position for the swash plate but sounds as if the internal linkage is worn /lot of backlash. How is the speed controlled, the coils are proportional or is has the automotive style regulator in the pump?
 
Top