• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

d6n

  1. C

    2011 D6N LGP Hard Braking

    2011 D6N LGP Serial: GHS00570 Hey there. I’m having an issue with the above listed machine braking aggressively. There is no in between. As soon as you begin to depress the brake pedal, it brakes at 100% and does not gradually brake when gradually applying pressure. I do not currently have any...
    • CEvans
    • Thread
    • brake solenoid caterpillar d6n d6n braking issues
    • Replies: 22
    • Forum: Dozers
  2. P

    D6NXL operator seat sensor

    Anyone know how to bypass seat sensor in a 2019 D6NXL so it thinks operators present? Sensor is bad and it’s not a cat product trying to see other options other than buying whole new top half of seat.
  3. P

    Cat D6N flood light Fuse number

    Hi, My external lights are no longer working and suspect a fuse. The Dash lights all come on when i switch the lights on though? IS there a dedicated fuse for the external / flood lights and if so does anyone knwo which one? I found this but no idea which fuse to pull and i don't want to...
  4. P

    Cat D6N rear idler leaking

    my rear idler is leaking. How hard is it to replace seals and bearings? Or should I buy an after market one? Sure could use a procedure instruction and break down. Any help off suggestions appreciated. Thanks
  5. P

    Cat D6N pulling inactive codes 036

    036 0042.11 036 0091.02 Can anyone ID these. Thank You.
  6. P

    Cat DGN Turbo Failure and Air pre-cleaner heat damage

    My best guess is : muffler rusted and restricted. Caused Exhaust back-flow through dust ejection - caused motor to run hot - caused air cleaner to accelerate restriction through dust load and melting pre-cleaner pitons. Would appreciate the opinions of others. Also, Although I have removed the...
Top