• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

case skid steer

  1. hd66

    2014 Case SR250 Skid Steer, Intense Blow-by is Emptying my Crankcase Oil out the Dips Stick tube!

    I've owned it 2 years and less than 20 hours put on it in that time! 1770 hrs approx on meter. Used it about 2 months ago for 3 hours and no problem with engine. A week ago it was used for about 1hr and then I Shut it off after using and opened engine compartment to shut off the power switch...
    • hd66
    • Thread
    • blow-by blowby case skid steer case sr250 skid steer sr250
    • Replies: 8
    • Forum: Skid Steers
  2. T

    I have 1835B Case Skid Steer with 188D engine-fuel uptake question

    I put a new injector pump on my 1835B Case Skid Steer. Now I cannot get fuel to the filters and the diagram indicates a pick up pump which I cannot locate on my machine. I ran the unit after the installation of the injector pump. Question is: If I put an inline fuel pump in, what is the psi...
  3. S

    Case SR270 Aux Roller Switch Problem

    Hey y'all, new to the forum here and new to construction equipment in general. I have a 2015 Case SR270 with proportional aux hydraulics. I was going to hook up a backhoe attachment that has its on seat and dig and move the skid loader whenever it was time. However, I went to roll the auxiliary...
  4. J

    Case1835b issue

    Purchased at auction an old 1835b as is. Gas engine runs good(not sure of brand).Travels good however when raising arms it is slow and bucket dumps. One hydraulic line leaks pretty bad but if hydraulic fluid is full would this still happen? Not sure where to start to repair this unit. Thanks
  5. Bobcat Crazy

    Case Skid Steer/Cummins 3.9 Torque Specs?

    Hi All, I just bought a Case skid steer, I haven't even gotten all of the parts to my shop yet so I don't know a lot about it other than someone had taken it apart because the engine needed a crank and bearings. It has the Cummins 3.9 diesel engine. I have the new crank and bearings installed in...
Top