• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

966

  1. J

    90s Model Caterpillar 966E

    Hi! Please redirect me to the correct thread if this is the wrong thread, but I figured I'd start here. I'm looking to source/rent a moveable 90s-era CAT 966E (open to other models) near/around Dallas, TX for a commercial being produced on November 16th. The production company would also pay...
  2. Sameh

    High temp of the front axle oil

    Good day, anybody can help me about high axle oil temp of 966L loaders. What is the reason and the important thing i want to know where is the axle oil breather?
  3. G

    Mount a hydraulic winch on a Cat 966C?

    I have a 966C with forks that I use for logging - mostly decking and loading. I saw a local guy with a wheel loader that he had mounted a hydraulic winch on - in the front, so that it pulled into the forks - and that looked like a pretty sweet setup for doing some limited cable skidding...
  4. MAQBOL

    Eternal Caterpillar 966C Wheel Loader

    I rescued a Caterpillar 966C Wheel Loader that was abandoned and deteriorated. I put a lot of work and love to it and the result is shown in the photo. Due to the damage of its original engine, we put a CAT 3306 DITA engine. I have never worked with these type of old wheel loaders, after...
    • MAQBOL
    • Thread
    • 3306 966 966b antique cat cat 963 caterpillar old wheel loader wheel loaders
    • Replies: 6
    • Forum: Wheel Loaders
  5. ferrret3238

    D333 To 3306 conversion possible??

    First time poster, long time reader. I have a 966 b caterpillar end loader from 1964 I believe. The original engine blew and it was replaced with a d333 from a motor grader. The d333 is a small bore 4.5 inch with a block number of 7M4400 and a crank number of 8M4502. The motor grader d333...
Top