Results 1 to 4 of 4

Thread: jcb 214 series 2 brakes

  1. #1
    Probationary Member
    Join Date
    Dec 2016
    Location
    Pilot Rock oregon
    Posts
    2

    jcb 214 series 2 brakes

    Replaced both master cylinders then bleed brakes left side too tight no free play any ideas?

  2. #2
    Senior Member
    Join Date
    Mar 2010
    Location
    new jersey
    Posts
    733
    Right above the brake pedals is a free play adjustment bolt.I can email the service manual if you would like it.

  3. #3
    Senior Member
    Join Date
    Nov 2014
    Location
    United Kingdom
    Posts
    205
    Make sure you have free play on the push rods as per tool_king said when you bleed them them split the pedal link and hold the right half way down and bleed out the left and then do the opposite left half way down bleed out right side this allows bleeding of the link pipe between the master cylinders.

  4. #4
    Probationary Member
    Join Date
    Dec 2016
    Location
    Pilot Rock oregon
    Posts
    2

    ahadden

    Thanks for the reply I'll try it!!!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •