Genie z-60/34 ... fwd drive only after turret rebuild.

[raistlin]

i was afraid you were going to say that. There is a broken combine in the barn in the way of the hoist. dang. on to the next project so that i can finish this one!

[raistlin]

Problem fixed! the tech who rebuilt the rotary put two fitting in the wrong holes, so when the mech put the machine back together the hoses were on the right fittings, but the wrong ports! Operationally checked: OK. Thanks for your help VoodooMojo!

[VoodooMojo]

That is good new!
you will need to inspect the drive motors / brakes for seal damage and be sure to drain the torque hubs and refill with SAE90 Multipurpose hypoid gear oil.