Almost wiped out in my own shop -

[Mike Van]

Just a heads up - Late yesterday, just about time to quit, I've got a 6 ft pry bar behind a loader bucket pulling about all I can. The bar slipped, I'm on the cement floor so fast, I think gravity works faster as you age. My tailbone landed on some 2x6's, the back of my head hit the shop door hard enough to close it, my right knee must have twisted, and if that wasn't enough, the 6 ft bar fell across my left shin. First time in my life I think that I didn't pop right back up. Layed there about a half a minute finding out what still worked. My 60 years was showing I guess. I was alone, as usual, no one would have missed me for at least an hour.

[grandpa]

Well if you got any idea's on how to spring back up... im all ears. Glad you weren't seriously hurt.

And now you know what willie59 feel's like everyday...bwah ha haha.... the old sidewinding whippersnapper.

[willie59]

And now you know what willie59 feel's like everyday...bwah ha haha.... the old sidewinding whippersnapper.

Yeah you old sawed off scissorbill, lost count of the number of times I've looked like a helicopter crashing.


Yes, good to hear you're ok, one must be careful working, especially when you're alone.

[2stickbill]

Maybe you old cogers need to get Life Alert.Just a push of the button and helps on the way.

[John C.]

The only way I could bounce back up is with rubber floors.

[mitch504]

I've started collecting old bedsprings and flooring my shop with them, to help me get back up.

[2stickbill]

I keep the chain hoist handy.

[Phill]

glad to hear your ok, might wanna try some football gear next time all kidding aside i hope its another long time before this happens again, that Murphy guy is a PITA

[CM1995]

I've started collecting old bedsprings and flooring my shop with them, to help me get back up.

Mitch you just inspired my next infomercial.

[alrman]

I know just how you feel Mike!
Amazing how in our minds we're still 20ys old & think we can, or should be able to do what we could do then.
I took a tumble at the beginning of the year. Stepped out side the w/shop to visit nature & went A over T on a wet path - this was the result.
Only takes a moment, a simple slip, & things can change big time.
So guys, if your self employed - keep your income protection insurance paid up - you never know.

[oldtanker]

OUCH! Yea I'm a lot slower getting up the older I get! BIL is an accident waiting for a place to happen in a shop. Thing is he keeps making the same mistakes over and over. Friend this winter broke his leg doing something in his shop he's done a thoushand times....using too short a ladder to get to the shelf where he stores his filters. His wife has told him a million times that he needs a longer ladder or a different storage plan. I was there when he fell, good thing too as his wife and daughter were not home and he would have been there on the floor for several hours before they would have gotten home.

Glad nothing real bad happened!

Rick

[Mike Van]

Looking at airmans pic I guess I was lucky - That was alomost a compound, and I don't mean bow.

[tedtirao71]

slips and trips..... simple types of incident.... but different level of risks... from minor fracture to major head injury..... first control measure, proper housekeeping..... always take care guys....

[3rdGenDslWrench]

I had just gotten done putting on an undercarriage to a old D7G. Tightened up the master link bolts with a 3/4 drive air gun till they stopped moving. Ran the machine outside to fill it up with fuel at the dock and we always put a cheater bar on the master links just for a little bit of extra insurance....so the first 3 bolts went fine. The 4th bolt was no bueno. I had the pad facing up so it was at the top of the track frame....the head of the bolt just sheared off. I remember feeling a jolt....looking at my feet as I'm flying backwards and saying to myself " oh $h!* I havent hit the ground yet". I landed on my tailbone, got the wind knocked out of me, my head narrowly missed the big guards to keep trucks and equipment from hitting the fuel pumps.

[Axle]

[...]