Mustang 960 owners: I have your parts manual!

[mustang960]

OH that makes sence...thanks for the info, now I should be offically able to PM. thanks

[mustang960]

Thanks to Joe I now have both the parts and service manuals for my 960. I bought the machine last week and am currently rewireing the ignition and information panel to include gauges instead of idiot lights. With his digital manuals I was able to print a schematic of the electrical system on my plotter 3' by 4' and hang it on the wall by the machine. The overall ease of looking straight at the poster while in the seat was priceless....thanks. I'm willing to pay to forward, so if any of you need any of the manuals, let me know.. Again, thanks Joe...

[caffe]

So glad to find this here. I have a wounded 940 in the back yard. Could you please send me the service manual and the 960 parts manual (just for good measure).
I agree with mustang960: those who have the manuals already can pay it forward and take the load off Joe; I'll do the same.

hef @ tmj . mailsafe . net

Much appreciated!

By the way CMS1995: I live very near (by West Texas standards) the "Diesel Fried Chicken" store you have for your profile picture.

Thanks!
-tj caffe

[CM1995]

By the way CMS1995: I live very near (by West Texas standards) the "Diesel Fried Chicken" store you have for your profile picture.

Welcome to the Forums caffe. Although I didn't take the picture in my avatar, I did stop at the exit off I-20 and fuel up at the travel plaza across the street on a road trip a few years ago. I have a picture of the sign but it didn't have the stack of tires, kinda adds to the ambiance.

I have family in Odessa and I understand the "close by West Texas" standards. I have learned to ask how far is "close".
Cheers.

[broken mustang]

hi joe can you please help me ,please send all parts +and srvice manual to me i have a broken chain in rh side ? send to lpmundo@charter.net

[broken mustang]

ha please help send parts+ all manual thank you joe had noise coming from rh side wheels now its no movement in rh wheels please help

[jamieg]

Hello fellow Mustang 960 owners. Someone has given me an electronic copy of the parts manual for the 960. Its in pdf format and can be emailed. "in part or whole" - no charge! I also have the service manual that covers the 930, 940 and 960, also in pdf format. Manuals are dated 1994. The vendors charge an arm and a leg for these things. Give me a holler if I can be of assistence in this regard. Scan quality is adequate. If anyone has the operator's manual for the 960 in pdf, I'd love to have a copy of that one too.

Hello Joe. could you please send me a copy of your 940 service manual I would greatly appreciate it. jamieg@skymesh.com.au

[milexcavacion]

Hey, any manuals left? If I could get one for the 940 it would be great. If you don't have parts manual could you at least send me a service manual at milexcavacion@gmail.com

[Simons]

jeostewart,

You are a God send, just foud the forum and there you'll are! I also have a 940E and love it, but it has started to over heat on me, I think that it is the water pump. I shore could use a copy of the service manual and a parts manual if you or anyone has one. Also am looking for source for engine parts for it. Simons email: simonsjerry@netscape.net

[mannal]

I would greatly appreciate receiving the manuals that you have available for the mustang 960. Forever grateful. papatroy1@bellsouth.net

[Simons]

Thanks for the manuals. I actually have a 940E the parts manual doesn't work for me but I will hang on to it someone may need it later. If someone has a parts manual for the 940E that they could share copy of I would appreciate it. Have found a parts dealer on line out of state and talked to them, like what little dealings i.e. (talking about availability of parts) I have had will keep you updated.

Jerry

[mannal]

Thanks so much for the manuals that you sent for my Mustang 960. You are a life saver -- and your response time was incredible. Thank you again, and again.

[dannymatthews]

I would really appreciate a copy of the repair manual. I already have the parts manual. My mailid is matthews.danny@rocketmail.com
Thank you,.
Danny Matthews'

[dannymatthews]

Joe,
Thank you for the manual. Now days it's rare to find guys willing to take their time to help others.
Thanks,
Danny Matthews

[cartoad]

i would really appreciate a copy of the manual for my 940. Thanks
chrlslovak@yahoo.com