• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. C

    310G extend a hoe cylinder

    I have a 310G with extend-a-hoe. The hydraulic line to the extend-a-hoe lift(retract) cylinder is broken and needs to be replaced. I cannot see how to get to the cylinder inside the dipper stick to remove the line or cylinder. Any suggestions? Anyone have a 310G service manual they could share?
  2. C

    D5G multiple problems

    I have a D5G (SN: 005GTFDW005XX) with multiple problems. I have had the machine for less than two years and my son has done most of the driving it pushing mesquite trees. The machine is at my ranch in So. Texas, 130 miles from home. I only get there about one full day per week to work on it...
  3. C

    Injector pump timing

    Ok, so I have a Ford 7000 that I am about to change out the Simms injector pump. The procedure for this tractor is to line up a timing mark on the flywheel with a small inspection port on the bell housing (with the #1 cyl at top dead center) and have the pump on the #1 cylinder when it is bolted...
  4. C

    Thread locker?

    I have a D5G that has dropped the right front lower track roller. I put it back on With new bolts after running a tap in the holes, but noticed that at least 2 of the four bolts have partially stripped threads. I see that some one had tried to weld it on, but that did not hold. After about 45...
Top