• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. D

    Ford-New Holland L553 boom and bucket doesn't work

    Hello! I'm trying to repair a L553 skid steer. The bucket and the boom doesn't moves. I checked all of the wires at the module, and seems ok. When I activate the seat switch, the leds timer and seat turns on, then I activate the seat belt swich, the led of the belt also turns on. But the machine...
  2. D

    Clark CEM 25S error 04 on display

    Hi all guys! I'm trying to repair a forklift Clark CEM25S. I have a no continuous code on display, its 04 code. I has revised shunt wires, and can't see any trouble there. Any suggestions?? Thanks in advanced. David.
  3. D

    Bucket kickout adjust 962G

    Hello again!! I was solved the problem. When I connected ET to the machine there are 2 fault codes. High voltage on tilt sensor, and something like "must calibrate tilt sensor" (I don't know if this is a good translate, I saw it in spanish). First, I tried to disconnect the connector near of...
  4. D

    Bucket kickout adjust 962G

    First, thanks for your quick response, I was wrote wrong the model number, it was a 972G II, with prefix AXC. The machine is away from my company and I must to do many kilometers to get to it. There was a problem on tilt movement, the kickout doesn't works, and ocasionally the movement don't...
  5. D

    Bucket kickout adjust 962G

    Hello, I need to adjust the tilt position sensor on a 962G with prefix AXC. I was seaching the way to adjust it with ET, but only was seeing how to calibrate the sensor, not to ad or remove degrees or percentage. Is there a mechanical adjust?? Any help was apreciate. Tnks in advanced. David.
  6. D

    Caterpillar 140H transmission problem

    Hello, thank you for answering, I'm checking with connectors plugged. I was inspected continuty of the wire from ecm connector to coil connector, and it was good. I think the problem is at ecm, but I has never used ET, and I haven't the adapter to use it.
  7. D

    Caterpillar 140H transmission problem

    I have a similar problem, I'm trying to repair a 140H CCA, and there's no voltage in the coil number 8. So the machine only works on 1,2,3,4 forward, and 1,2,3 reverse. I was revised all the wiring from ecm, and there's no voltage on the line of 8 coil. Any suggestions?? Tnks in advanced. David.
  8. D

    Caterpillar 216B Auxiliary hydraulics

    Yes, I think it so, the only problem of the joystick is the proportinal switch. Here in Spain, the joystick costs more than 800 €. The hall effect switches from Otto, that means tbone1471, costs about 60 €, so, I think I can't mount it, because, the imput power of the oem Joystick is 8V, and the...
  9. D

    Caterpillar 216B Auxiliary hydraulics

    Hello! I'm reparing a CAT 216 B, the problem was at auxiliary hydraulics, the joystick was wrong and don't send the rigth signal to ECM. The joystick is the reference 2158307. This joystick is so expensive, and I was thinking to change it with the reference 2233725. Any one tknows if I can...
  10. D

    HELP! Bobcat S185 Won't start INPUT

    The same problem on a 751G Hello, I has the same problem on a 751G, but in the machine I'm trying to repair, the problem persist allways. I'm trying to check the continuity of the harnesses, but I don't have the wiring diagram. Can any one help me?? I suspect than I has the problem on a broken...
  11. D

    Dealer Nord-Verk

    Hi, I'm writing from Spain. I need some parts of Nord-Verk model 130 VHT, I'm looking for a dealer. Any one knows its web page?? Tnks, al lot David.
  12. D

    BobCat ACS error

    Solved Hi again! I has solved it!!! I was calibrate the controler on the machine without conecting any computer on the machine. It was preconfigurated and must calibrate on the machine. David.
  13. D

    BobCat ACS error

    Thnks for you atention, one more question, 5v back in?? I did'nt look for it. I have tested out voltage at hand sensors, and it was about 3.3 V in neutral at both sensors. Is this correct?? tnks one more time. David.
  14. D

    Workshop Manual for Komatsu WA 300...

    Hi, you can look here: http://www.autoepc4you.com/catalog/view/?id=435 I think that's you looking for. Good luck!!
  15. D

    BobCat ACS error

    Hello to all, first I must to excuse my poor english, I writing from Spain, I will atempt to explain as best as possible my problem. I write at this post for two reasons, first I'm new at this comunity, and second I have a problem like the problem of this post. At our company we repairs...
Top