• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. B

    7410 PTO Not Working

    JD 7410 w/cab, PTO light comes on solid for a second or two then starts to flash. Shaft not moving at all.
  2. B

    Komatsu -10 security lock?

    Anyone know how to set a passcode for security on a -10 excavator? I saw an old post but didn’t see anything explaining it. Don’t want to leave on a site without a passcode. Thanks
  3. B

    Dump truck bed lights

    07 KW T800. All lights, blinkers, etc. on front on cab/fenders work fine. Bed lights don’t work. No marker, running, brake, or turn lights. Could this be a ground issue or could one light be bad somewhere making them all not work? I have fire past the last plug under back. Trailer lights work...
  4. B

    Cat 299D2 attachments won’t work

    I have a 2018 high flow xhp machine. No hydraulic attachments will work. The hoses don’t even pressure up. I had a previous issue when an operator (no longer employed) put a jug of def into the hyd tank. Didn’t crank it, but at the time didn’t know where the tank drain hose was so we cyphoned...
  5. B

    299D2 No response to work tool joystick

    2018 machine w/ ab 1800hrs. Will not move the arms or bucket. Park brake disengages like it should. Will travel forward and reverse. Looking for suggestions. Did this one time yesterday morning and was able to get it to work. Wouldn’t do anything today
  6. B

    Dozer blade comes up by itself

    Have a 2018 Komatsu D39PX-24 w/ 3000hrs on it that the blade will come on up on it’s own after letting go of joystick. Joystick does have some play/slack in it. It also does this during operation which stinks. Looking for suggestions on things to check. I’ve been told the joystick slack could...
  7. B

    Cat 299D2 power loss

    Yea our 2018 299D2 will work fine for a minute or 2 but then we started working it this morning and it will lose engine RPMs and power almost to a stall. Example today was working a pile of loose dirt and go to spin or scoop and it will lose RPMs fast. It works fine until this happens. Cranks...
  8. B

    299D2 XHP Runs Hot high RPM

    2018 Cat 299D2 XHP engine temp will run hot when rpm’s get up above 2000 when running bucket only. Have a drum mulcher but haven’t even tried to use it since just the bucket causes trouble. It has been to local CAT and they pulled and cleaned the radiator, checked sensors, checked fan, and...
  9. B

    Volvo EC160B New Batteries

    Excavator needed new batteries so installed 2 new ones this afternoon. Tightened everything good, then turned on master disconnect switch and heard a small pop behind battery compartment somewhere. No power to ignition, radio, cab except the cab dome lights work. Exterior lights work also. Both...
  10. B

    Volvo excavator hyd functions control

    Have an EC160BLC and the joystick functions on both sides have started acting up. When you crowd stick in the stick wants to come in on it's own and then it will only stop when you you push the stick the opposite direction. The boom also does the same thing. Looking for any advise.
  11. B

    Volvo travel motor high speed

    Have a EC160BLC and one of the travel motors locked up and sent brass and metal thru the hyd system. The other motor and swing motor were checked, resealed, and ok. The salvaged motor needed a new swash plate. Drained system, changed filters, and put back together. The high speed travel wasn’t...
  12. B

    Volvo EC160BLC Boost pressure test

    Can someone tell me where and how to test the boost pressure on an ‘06 Volvo EC160B with a D6D engine?
  13. B

    Volvo excavator Auto idle

    EC160B auto idle just started acting up because it will not idle up when tracking. It also will idle down if only tracking. Ideas?
  14. B

    Replacing 650J cab mount isolators

    Looking for any advice on the process to replace the isolators on a JD 650J cab dozer. Is it simple? Any special tools required? Does the cab have to be removed? Thanks
  15. B

    Engine wiring harness for Volvo EC160BLC

    Looking for place other than Volvo dealers to get the wiring harness that goes to my boost pressure sensor and it also goes to the crank speed sensor. Does anyone know this part # and also where to find besides the dealer? I think it’s either part #14515820 or 14537185 but not sure which is...
  16. B

    Injectors for a Volvo D6D engine

    I’m looking for recommendations where to buy fuel injectors for my Volvo trackhoe other than the dealership.
  17. B

    Volvo 160B LC trackhoe leaking in turntable

    Looking for suggestions for the oil that is leaking down in the turntable. It’s all around the hyd swivel (see pic) but doesn’t look like hyd oil. Thicker so thinking it’s gear oil from the swing l gear box since I’m having to add gear oil. Any ideas what may have failed? Also looks like mixed...
Top