• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. B

    Bobcat 753 no steering

    Thanks crewchief, sorry for not responding sooner we were expecting some bad storms yesterday and the wife would not let me turn on the computer. I hope to get on the bobcat this weekend and try to isolate this charge pressure issue . I looked at the pump last night and it looks like I am going...
  2. B

    Bobcat 753 no steering

    Can anyone tell me where the charge pressure check valve and charge relief valve is located on the 753? I have a parts manual and maintenance manual on order, should be here soon. I just wanted check and make sure there is not any trash in them.
  3. B

    Bobcat 753 no steering

    OK I just came in, I got the right caps today they are -12 flat face caps. I unhooked and checked both drive motors and got the same results, 80 to 85 at idle and 130 to 135 at full throttle after it gets to temp. I say when it gets to temp the temp gauge isn't working at present time so when I...
  4. B

    Bobcat 753 no steering

    Thanks willie, I think your right on the threads but im using a 1 3/8 service wrench on the fitting. but I checked the invoice where I bought the hose and there is a lot of JC-12 in the description, but he did add a adapter to the end because he didnt have the correct crimp on fitting but I...
  5. B

    Bobcat 753 no steering

    sorry I have taken so long to get back I have been trying to find some caps to put on the pump, yesterday I went to the hydraulic store and told them what I was doing and they gave me 1 inch caps I told them I thought they were to big and opted to buy 3/4. Well as my luck goes they were to small...
  6. B

    Bobcat 753 no steering

    OK I am back I had to find a gauge to check pressure, dealer said the book says 200 psi at 128 degree operating temp. ( he mentioned he thought that was a little high) I checked at idle after warm up it was about 80 psi and at full throttle it was about 130 psi. I had to order a new pressure...
  7. B

    Bobcat 753 no steering

    hey guys I"m back, well my new belt came in and I picked up a couple of torsion bushings for the steering arms because they were very loose. I installed the new belt, still could not find the pointer I got it as tight as possible, it seems pretty tight. I installed the bushings someone had...
  8. B

    Bobcat 753 no steering

    I found and tried to adjust the drive belt today according to the decal on the back door there should be a pointer that should be pointing at 3:00 when properly adjusted, but I cant see a pointer, I tried to tighten but I think its in the same position as before, I am not sure how tight it...
  9. B

    Bobcat 753 no steering

    I know this may be a dumb question Where is the drive belt?
  10. B

    Bobcat 753 no steering

    I just signed on so I will check the drive belt tomorrow, but I did get everything together today. The case drain filters I did check and someone has removed the bronze filters out of both so I will have to get some springs next week because I have already purchased the bronze filters. I filled...
  11. B

    Bobcat 753 no steering

    I was able to run into a pile gravel and did seem to lack power. I was able to get about a third of a bucket of gravel and the bucket traveled slow thats when i found the control valve seals were leaking. I just finished replacing them so I havent had a chance to check out anything yet I was...
  12. B

    Bobcat 753 no steering

    Hey guys I am new to the forum and new to skid steers, I recently purchased a 753 with problems It will not steer to the left or right. Forward and Reverse seems to be good but when you try to turn it acts as though it wants to turn but will not. I have replaced a leaking drive motor hose and I...
Top