• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. S

    Case CX60C 18' annoying beeep beeep

    24, 36, and ditching
  2. S

    Cat D6K2 and Trimble GCS900 electronic problems?

    That would mean you are loosing power to the controller that powers the globes because as long as the machine is keyed on, the globes will be lit up.
  3. S

    Cat D6K2 and Trimble GCS900 electronic problems?

    Our d6k2 had that problem. We found it to be in the seat harness. Ours would not loose signal, the button wouldn’t work I just re read your problem, do you loose lights on the receivers?
  4. S

    Case CX60C 18' annoying beeep beeep

    We made new wedges that bolt under the travel pedals to bring the front of the pedal up. It helps a lot. The swing pedal doesn’t bother us, but I could see your point. I looked into getting another rear counterweight to stack to the original one. It’s $1400.00 for the 400lb.weight. Our...
  5. S

    Case CX60C 18' annoying beeep beeep

    My60c is fully loaded. It has the extra counterweight. Still, when digging footings with the 2 ft. Bucket and throwing it to the side makes it tipsy. If the rubber tracks aren’t on super even ground,it is tipsy without the blade down. I do agree about the 2 speed on the dash and the wierd...
  6. S

    Case CX60C 18' annoying beeep beeep

    We have a 2019 model. The cab is nice. It just went in to have check valves and new valve spools put in the control side of the hydraulics to smooth out the jerkyness. My biggest complaint is that it’s not stable. You have to put the blade down when doing anything. Honestly, I think the...
  7. S

    Case tv 380 air, lights, stopped wprking

    My tv380 is a 2015. I’ve had it not start once like yours, but heard clicking. My dealer found a relay Under the the cab behind wear you put your feet that was bad.
  8. S

    Deere 333g

    does anyone have experience with these new models?
  9. S

    New Holland C238 High Flow Issue

    our tv380's which are the same as your nh will run our bradco mowers in both directions...high flow
  10. S

    Deere 333E with brush cutter terrible noise when stopping mower

    all of our mowers and brush cutters coast down. if it is dead heading the pump, that is bad and would crap a pump in a hurry
  11. S

    Case tr270 smoking.

    id check the turbo. we have been through 3 of them. for some reason, if the machine sits any lengthy period of time or use in cold weather the turbo doesnt get oil right away and smokes the bearings
  12. S

    Case 420CT Series 3 won't start intermittently, even right after turned off.

    I have found that the battery disconnect switches get corroded inside. also, the terminals on the outside of it will break but still look attached until pulling on them. check all grounds
  13. S

    which big mtl to buy?

    we run cat 299d2 models and case tv380's. both have been good machines and reliable. all have high flow due to running diamond brush heads
Top