• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. E

    322bl long reach, stick cylinder barrel cracked beyond repair, need one asap cat part #116-9123

    well I had to send it off to get rebarreled, it developed a small pin hole that I welded up, then a week later this happened. all the cylinder guys I talked to said they have never seen this happen before.
  2. E

    322bl long reach, stick cylinder barrel cracked beyond repair, need one asap cat part #116-9123

    best time I found so far on a machine shop rebuild is 4 weeks
  3. E

    322bl long reach, stick cylinder barrel cracked beyond repair, need one asap cat part #116-9123

    looks like the only new ones are across the pond 10 weeks out minimum, any body know where there is one in the u.s.?
  4. E

    battery cable suppliers

    was going to buy the tempo indent type multi crimper that just threads in out for adjustment said it will crimp the feral on bigger battery connections
  5. E

    battery cable suppliers

    has far has crimpers is the try- form better then the indent type?
  6. E

    I gave notice about starting my pension today!

    idle hands are the devils workshop, old operators don't retire,there filter falls out, they use the word NO a lot more, and get to do whatever they want. enjoy my friend !!
  7. E

    battery cable suppliers

    has far has wire size range, will 2/0 cover most applications or do you think I need to have a bunch of different size wire on hand? was thinking of getting a roll red and black 2/0 then a couple rolls 14ga for lights, control wiring
  8. E

    battery cable suppliers

    welding wire is ok for battery cables?
  9. E

    battery cable suppliers

    where do you guys, that do in house battery cable stuff buy your supplies, crimpers,wire, clamps ?
  10. E

    Rebuilding Deere 1810E scraper

    how is it going out there you have those slips, moving dirt yet?
  11. E

    best tire machine for big tires, any good hydraulic units out there?

    yes that is what I am looking at, any body else have any experience with one of these? thanks
  12. E

    cat 322bl 2ES00775x serial intermittent no start

    part number is 121-1491 looks like there are three of these in the valve stack having a hard time identifying the swing stack?
  13. E

    cat 322bl 2ES00775x serial intermittent no start

    would I need to look at the swing brake solenoid, could a low voltage problem mess with this ?
  14. E

    cat 322bl 2ES00775x serial intermittent no start

    I started out cleaning grounds, then went to batteries, I found a cable between two batteries that was not getting a good connection.cleaned up connection and got it running but still need to install new cable. today the swing function stopped dead in its tracks, so tomorrow I will install new...
  15. E

    cat 322bl 2ES00775x serial intermittent no start

    got it thank you
  16. E

    cat 322bl 2ES00775x serial intermittent no start

    just messed with the fuse its a 10 amp for the key start, LACHAU is there any way to make a exploded view of that electric drawing its just mot quite big enough for me to read. thank you
  17. E

    cat 322bl 2ES00775x serial intermittent no start

    sometimes it fires right up, then next time no power to key switch, come back in a hour, fires up. anybody have a electrical schematic for this.
  18. E

    best tire machine for big tires, any good hydraulic units out there?

    seems like I spend more time fixing tires then working, its like the amish are throwing nails out the back of there buggies when they leave work. anyways, any body use or have a hydraulic tire changer for semi tires and up, that works better then a set of irons.
  19. E

    Rebuilding Deere 1810E scraper

    Shimmy can you take a pic of your welder setup with the suitcase on top, looks like a nice setup. thanks
  20. E

    Rebuilding Deere 1810E scraper

    let us know how the aluminum holds up, should be sweet, way lighter. see your running the flat track cats to pull those units, good rigs,bullet proof trannys, don't make them like they used to. just think how many yds those pans have pulled in there life time. might not exceed what's in the dam...
Top