• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. Vetech63

    Case 580c stablizer control valve.

    Every fitting and valve will have orings on them. Replace each one.....you should be able to get orings matched up locally. The spools will have orings just inside the internal bore so the spools will have to be removed. Make sure you mark each spool, so you get it installed in its correct bore...
  2. Vetech63

    324D

    Model and serial #? Pics help a lot too
  3. Vetech63

    Hitachi ex200 lc

    You left out us smart elec peasants. ;)
  4. Vetech63

    Giving warranty on used equipment

    You can sell it with a warranty. Just make sure the buyer understands that the warranty expires when the cash hits your hands.
  5. Vetech63

    JD310SJ Hydraulic Pump Outlet

    When an ORFS fitting comes loose, its usually because the oring in the fitting is too big (thick or dead and damaged.) When you tighten the connection it compresses the oring and spreads the outer edge onto the metal contact surface and after a bit of time the oring fails causing it to be loose...
  6. Vetech63

    Any Detroit Diesel experts here?

    If you have oil on the blower rotors, then you have leaking rotor shaft seals. Bad leaks from there can flood the airbox and cause oil burning in the combustion chambers. If you only have a single port showing an oil leak, you more than likely have severely worn oil control rings on that...
  7. Vetech63

    Selling equipment

  8. Vetech63

    Selling equipment

    Cash only
  9. Vetech63

    Precombustion chamber temperature???

    Pic of this slobbering you are referring to?
  10. Vetech63

    This will be an interesting thread moving forward......

    I billed them for my time...........just like I was repairing something. I'm not doing **** for free here lol
  11. Vetech63

    D3 valve body clutch pressure issue

    Hey! Get those gloves off! You have to get your hands dirty here :p
  12. Vetech63

    Hello

    I will support a pic of your hot wife ;) LOL......just kidding (maybe)
  13. Vetech63

    This will be an interesting thread moving forward......

    It seems the company officials are confused, at least they were yesterday. Alan texts me (I hate texting really but it seems his favorite way to communicate) asking about the machine me and the operator declined. After the 3rd text I just called him. He wants to know why we had made that...
  14. Vetech63

    What's your hoe doing?

    Well, mine just finished breakfast and is leaving for work in a...................oh wait ;)
  15. Vetech63

    This will be an interesting thread moving forward......

    Complete waste of time on the Florida trip. Way overpriced for the condition. On to the next project.
  16. Vetech63

    This will be an interesting thread moving forward......

    I was taught that where the welding will occur and where the ground is attached is the most important. If you are going to do boom welding and attach the ground to a grouser pad, it will arc through every bearing and pin to make the connection. I always attach the ground on whatever I am...
  17. Vetech63

    This will be an interesting thread moving forward......

    I see a lot of potential problems. 1st. It looks like it has been working in the salt environment of Florida its entire life. 2nd. I see a LOT of rust forming. 3rd. I was supposed to go to the job where it was working and observe the operation. Now it is down with some type of electrical...
  18. Vetech63

    This will be an interesting thread moving forward......

    https://dealers.sandhills.com/InventoryInspections/Public/ShareInspections.aspx?dslookupid=150108112157&inspectionid=340607&checksum=9E3FFB93D22311471F6B26BF8B05E8BD The link above is what I am going to look at. Look through the pics and tell me what you see.
  19. Vetech63

    This will be an interesting thread moving forward......

    Taking the red eye on Monday. The itinerary looks to make it a 20-hour day. UGH
  20. Vetech63

    This will be an interesting thread moving forward......

    Not a lot to report but, I saw the potential hire a couple of days ago..........I say saw because I didn't actually meet the guy. Him and Alan came in the shop while I was working on a broom, they stayed in there about 2 minutes, and bullsh&^ted outside for 45 minutes. I never was introduced to...
Top