• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. S

    Genie S85 S/N 1708 year 1999 - Hydraulic problem

    Dear Don, How are you? Long time no have contact you. We just replaced the seal of the 02 cylinder of Secondary boom of below machine, before that all function in normally working condition But after replace the seal, we faced a problem with Genie Z45/25 IC Year 2000, serial: 15327. that we need...
  2. S

    Genie S85 S/N 1708 year 1999 - Hydraulic problem

    Dear Don, Another thing. When no Power to G valve, no active any function the pressure is only 600 PSI When power to G valve, no active any function, the pressure is up to 800PSI boom up, pressure up to 1500 PSI Boom down fully, pressure is 2300 PSI Boom fully retracted, pressure 2900 PSI...
  3. S

    Genie S85 S/N 1708 year 1999 - Hydraulic problem

    Dear Don, Follow your instruction, We already inspected the CC valve. We replaced another CC valve from Similar machine. Now we can active steering left/right is ok. for the Jack chasis. We only can Jack up but not Jack down. it mean. The jack cylinder can extend but not retract For another...
  4. S

    Genie S85 S/N 1708 year 1999 - Hydraulic problem

    Hi Don, We hope to receive your idea, We already bought new Valve Y, L and also dump valve (G) replace the old one At the begining. As soon we replaced the brand new Y,L and also G valve. When we supply 12V and no active any function. The hydraulic system sound is normally ( only sheeeeee) we...
  5. S

    Genie S85 S/N 1708 year 1999 - Hydraulic problem

    Dear Don, How are you? Once again we need your support! Yeah, We already bought and replaced new L, Y Valve for this machine. Then the result is: 1. when we start engine, no power in G dump valve, the Hydraulic is normal, hydraulic system pressure at 600 PSI around ( no noisy), very smooth 2...
  6. S

    Genie S85 S/N 1708 year 1999 - Hydraulic problem

    Dear Don, As you explained so... G valve will received Power whenever the function engaged, right? Whenever we operate such boom up/down, turn table left/right, .... the G valve will receiving power (12V)? How about the driving and steering function? Do the G Valve still receiving power at the...
  7. S

    Genie S85 S/N 1708 year 1999 - Hydraulic problem

    Dear Lantaxco, Noted your information, so we have some final issue that: 1. if the boom up to NOHC (acitived) and LS2 (NC) no actived ( machine in normally working condition) we see the power will only go to the G valve when we retracted boom. 2. What is the problem if we disable the LS1, LS2...
  8. S

    Genie S85 S/N 1708 year 1999 - Hydraulic problem

    Dear Don, We Can understand a little bit your explain. When the boom is down and boom retract. the valve G is received 12V is confirmed. We understand it But if in another working such when the boom up/extend, turn table... ( not boom down and retract). The Valve G still received 12V directly...
  9. S

    Genie S85 S/N 1708 year 1999 - Hydraulic problem

    I think we are saying the same thing in different ways, yes power goes to valve G when the boom is down and not extended. Once either of those limit switches opens then power is only sent to valve G when certain functions are engaged. Since having the boom down and retracted at all times would...
  10. S

    Genie S85 S/N 1708 year 1999 - Hydraulic problem

    Dear Don, If the G (dump valve) always receiving power 12V. Do you think the coil of G valve will become very hot. Is it ok if working 03-04 hour/1 time? Regards Steven
  11. S

    Genie S85 S/N 1708 year 1999 - Hydraulic problem

    Dear Don, Look at the Diagram, we see that the Dump Valve (G) receiving power only when the CR20 actived ( when power supply to #85 of CR 20). the power come to #85 from: 1. red/blk wire only when primary boom down. 2. all power through LS2 (Normally closed). the power thourgh LS2 come from TB42...
  12. S

    Deutz Engine not firing

    Hello, We owned an Genie S85 year 1999 serial 1978 (4 WD). our problem is that we started engine. it would run and die after 05-06 seconds. we re-start and it is the same situation. We take out the shutdown solenoid deutz. We can start and engine run normal but we can not stop engine as usual...
Top