• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. P

    855d track loader

    Thanks I cleaned the suction screen and resealed it I didn’t check hose where it goes on transmission I never thought about having a hose clamp on it I didn’t pull belly pan did screen from top the pump only has 300 hours on it
  2. P

    855d track loader

    Transmission fluid foaming have to let set after warming up for air to go away before trans will work properly changed fluid case dealer said use hytran didn’t help at all actually a little worse still foamy is
  3. P

    855d loader

    I am having fuel problems. Machine will work great for 20 minutes then run out of fuel. I take the filters off and fill with fuel and pump the fuel pump with the bleeder just above the filters open after air is out close bleeder and pump till everything is full and machine starts up and will...
  4. P

    Control valve for 855d case loader

    Thanks the secondary shuttle valves was the problem. Appreciate the help
  5. P

    855d case loader hydraulic problem

    I really appreciate your help. You solved the problem. Thanks
  6. P

    855d case loader hydraulic problem

    No I just did a manual for machine thanks I will check the secondary shuttle valves out
  7. P

    Control valve for 855d case loader

    Thanks as soon as my gauge gets here and I check pressure I will go into the valves really appreciate the help
  8. P

    Control valve for 855d case loader

    Thanks for the info I have a gauge on the way t check pressure of pump. Do they make a fitting to go between the hydraulic lines and the control valve or is there another way to check the pressure there. Thanks again
  9. P

    Case 855d loader

    I posted my question on the loader page I did'nt know how to move it thanks the machine does not have 4in1 ripper or backhoe but it does have extra valve
  10. P

    Control valve for 855d case loader

    Can anyone tell me if the extra control valve in the stack on a 855d will interchange with the one that lifts the boom. It appears to have never been hooked up to anything. Any advice appreciated thanks
  11. P

    Control valve for 855d case loader

    Can anyone tell me if the extra control valve in the stack on a 855d will interchange with the one that lifts the boom. It appears to have never been hooked up to anything. Any advice appreciated thanks
  12. P

    855d case loader hydraulic problem

    The lift boom is weak under a load, but if I curl the bucket and hold the curl on while I lift the boom it lifts good. But the second I let off the curl it stops lifting. There is no backhoe ,ripper or 4in1 bucket on this machine, it does have an extra control valve in the stack that is not...
  13. P

    855d case loader

    Moved to loader page thanks
  14. P

    855d case loader

    Post moved from excavator page loader does not have ripper backhoe or 4in1 bucket the extra control valve does not look like it has ever been hooked up no the bucket doesn't drop when you start up
  15. P

    Case 855d loader

    Boom lift is really weak if I curl the bucket hold the curl on the boom lifts good the second you let off the curl I lose the lift any help would be appreciated thanks
Top