• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. N

    Let me get some pictures together so you can see what it has. Then I can give you a price, cause...

    Let me get some pictures together so you can see what it has. Then I can give you a price, cause I can’t recall everything that it has.
  2. N

    Isuzu EMPS III

    Is anyone still using this? I have one still laying around that I don’t use. Message me if you need one.
  3. N

    Deere 1050J pictures

    Has any of these machines had the fan motor moved from the bottom of the cooler to the top? Fan speeds? I may still have pictures of our modification. Also have they used the "Black Box" to adjust the hydrostatics?
  4. N

    Deere 750 c ii

    Servicing Dealer: PLASTERER EQUIPMENT CO.,INC Customer bought extended wty 3000hrs, exp Aug 07. That's a good sign, means dealer worked on this machine when ever problems came up. Customer actually carred about his machine. Was deleverd in Jan 05, so its an 04 machine. You can contact the...
  5. N

    Deere 1050J pictures

    Overheating issues how? Coolant or hydraulic?
  6. N

    Deere 750 c ii

    Post the S/N and I can help with some more info on it.
  7. N

    Deere 750 c ii

    I would have an undercarriage apprasel done, tracks look worn. Most dealers send a CSA to do it and no charge, want your business. 750C is good machine, check tracking and indexing. Check fault codes, operator manual should be in machine it will give you instructions on how to check.
  8. N

    Calif. Smog, Big Brother's Plan, It's Comming

    Subscribe to the ARB's email notifications, it will make you sick to your stomach. I have watched them fine their own cities and counties. The California ARB is like a state funded Mafia. Watch your back.....
  9. N

    HKX Hydraulic kit

    In the directions of the kit is explains after the first something or so hours I cant remember you must re-torque all the fittings. I have found this to the most absolute truth ever told.
  10. N

    HKX Hydraulic kit

    You will need a pump augment kit, this will allow for dual pump flow. You just need to call HKX and they figure it all out for you. They will not sell you something that will not work.
  11. N

    HKX Hydraulic kit

    Two way is good, but depends on your kit. Wether it has the electronic handle/pedal or manual foot pedal. If it's manual then real simple, but if it's electronic not so much.
  12. N

    HKX Hydraulic kit

    If you ordered the kit directly from HKX as a hammer kit then it will be no problem. They are one the best Aux plumbing kit manufactures I have ever used! I have built my one kits and would never ever do that again after using HKX products. Most important is to remember to install pressure...
  13. N

    hitachi valve clearance

    Ask for Steve in parts and he will direct you to the right person, great people over there! Actually I may have a spec on that engine, I will double check.
  14. N

    JD K loaders?

    Went to school on them back in October. They are real smooth, plus the added 5th gear is awesome. Plus a manual torque converter lockup is pretty awesome also. Back up camera/sensor option. Push button start, the list goes on and on
  15. N

    EX60URG Slew motor help

    This was another old auction machine trick. Guys would run a hose from the gearbox drain valve to the hydraulic tank when they blew a motor shaft seal. The dip stick usually has just enough of a seal to keep from blowing it off, so the oil would return to the tank via the hose. Your valve...
  16. N

    Hitachi EX-120-1 repairs

    Where did you get that number from, an old parts catalog? Its subs like 6 times, I will have to research it tomorrow.
  17. N

    Hitachi EX-120-1 repairs

    Sure you can lap the swash plate etc... However if the valve plate is cracked or damaged then its a waste of time. Usually are out of wear tolerances as I am expecting you already know. I couldn't count how many machines I have been to where the motor/pump was repaired and now the component...
  18. N

    Hitachi EX-120-1 repairs

    usually you don't even need to look at the pistons, you can look at the valve plate and right away know its time. Any scoring, cracks or warping will tell you all you need to know. If your valve plate is damaged don't even waste your time, rebuild or replace the motor. Rebuild means all...
  19. N

    Hitachi EX-120-1 repairs

    Did you check case drain pressure before you disassembled? Blowing this seal is almost always caused by excessive case drain. You are going need to either have to replace the motor or rebuild it. Pretty cut and dry solution for this type of failure. I will look up some prices for you.
  20. N

    Hitachi EX-120-1 repairs

    ohh yeah this brings back some memories
Top