• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. T

    WA270-7

    They’re a pain in the butt, I just finished a blower motor on one. Had to take everything apart in the dash to get the hvac housing split. Dealer said you’re you supposed to evacuate a/c and pull the whole housing out. The condenser on mine was super clogged but having issues now with the...
  2. T

    TD20B

    Have purchased from 3 different vendors only to be refunded and been told the part is no longer stocked. Any ideas?
  3. T

    Hitachi ex120-5 help needed

    Swing bearing and motor assembly should be similar to a Deere 120lc that will help you in parts breakdown for knowing what should and shouldn’t be there. But it’s pretty straight forward to pull swing gear assembly up and replace shaft seal. Deere dealer may be able to look up parts you need
  4. T

    TD20B

    Looking for a couple parts for a TD20B needing mainly a transmission strainer.
  5. T

    Lull 944e42 hydraulic manifold leaks

    Lull makes a fork tool to slide in there and pop them loose. It’s kind a size 8 and 12. Pretty simple to make with some patience. I think you may can pop them out with a couple screwdrivers once you get the hang of it. I’ll try to post a pic of the tool
  6. T

    JD 750c Dozer blade adjustment

    Depends on blade setup, if blade arms are outside dozer frame may need to shim up sockets at rear. If it’s a c-frame could be the ball not seat in middle or pins/housing worn on rear pins
  7. T

    John Deere 450H

    I believe one is for a remote option or a drain valve
  8. T

    Labor rate, billing, random question

    1: When u do a mobile call what is a good rate to charge and do you charge per hour or a rate from the minute you leave your shop until you get back to the shop or ?? for some reason i always feel after a call like i didn't charge enough.... I charge from when my truck starts to when I make...
  9. T

    Deere 450d hyd oil in final drives .

    Is this on a dozer or excavator?
  10. T

    Words just cant express

    Hey at least there’s no dirt in the system
  11. T

    Small predicament......I think

    We didn’t all and still don’t start a job knowing completely everything about what we are working on, everyone has to start somewhere and that has been a tough pill to swallow at times. There is however a reasonable amount of time and logical that should goes into a diagnostic process. It does...
  12. T

    JD 648 GIII

    Man I’d be all over that if you were a couple hours closer...awesome to share work man. Sorry you’re down and out right now
  13. T

    Anyone know what this control valve is for ?

    I don’t think it’s off a Deere machine. The sections on a Deere bolt straight to each other and it seems to have a section in middle. Also hard line ports don’t look light that on a Deere
  14. T

    Deere 200dlc develops miss

    Came across 200dlc that starts to get hot and develops a miss. You can restart and it will do fine for period until it repeats. Upon restart temp drops back down. Has high pressure rail and electronic injectors. Was throwing cam code for a short while. Found rubbed through places in injector...
  15. T

    Anti-Theft option on JD 330g

    It has to be programmed through dealer.
  16. T

    JD 650G

    Yes, what is the issue?
  17. T

    CAT D5C series III left track in reverse

    After freeing actuator you said it stuck again, seems as though you’re on the right track may Have to start digging in.
  18. T

    Case 75xt schematic

    Have a case 75xt not getting any response with key, switch is good, 12V presents and can watch signal voltage appear at relays but nothing more. Can anyone get a schematic for this machine?
  19. T

    Deere 200D LC setting aux pressure

    On all the “d” series machine we installed and “g” as well the pressures were adjusted manually turning screws around auxiliary spools. Just make sure not to set it over machine pressure because you want thumb to give to bucket to prevent damage down the road.
  20. T

    Deere 328 auto quick-tach

    If you have a meter or test light you can check out at q/t most common I have seen was harness down the boom at well.
Top