• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. U

    JLG 450 AJ Series 2 2006 Platform Control Issues

    Yes sir it has a 7 second delay. So if your foot is on for more than 7 seconds it will time you out.
  2. U

    Telehandler brakes grabbing

    First things first check brake pressure. Takes hydraulic pressure to release the brakes if your on the low side your brakes aren't going to go off fully when you release the park brake.
  3. U

    2001 Genie S60

    If the shop you took it to for the wear pads and shims did them correctly make sure your cables are adjusted properly if it all checks out grease the boom sections where the pads ride. A lot of the time its that
  4. U

    JLG 450A Telescoping boom hose replacement

    make sure all the clamps on the push tube are off. And on the catrac there are more. Then the best way is to get the new hose connected to the old hose and snake it through with a union. If you have too much trouble around bends wipe Go Jo soap on the hoses and they will slip on by. I work on...
  5. U

    JLG 450A Telescoping boom hose replacement

    hey buddy ill point you in the right direction. do you have the machine completely stowed meaning boom down and telescoped in?
  6. U

    Gradall/JLG G943A Frozen steering

    I have a few suggestions, have you checked your stand by pressure? If its low It could have hard steering effect. Also do you have antifreeze hydraulic oil in the unit? especially being up north.
  7. U

    Bobcat T190 Park Brake

    Thanks for all the help and the personal experiences. Well I did that final test there is no leakage in those brake lines I left them completely open started it up and moved the machine. Nothing is bypassing those drive motors. Can't wait to tear it apart and see what is going on. Ill keep you...
  8. U

    Bobcat T190 Park Brake

    Crew chief this machine is from auction so I would think anything is possible. But I did the test that Willie said to do and with no pressure going to the brake side to release the brakes it still moves as if the manual override is on. It's off though. Seems to be working fine the light comes on...
  9. U

    Bobcat T190 Park Brake

    Well its the last thing I thought broken springs, I conducted that test and machine still moves freely even after taking off the lines. They aren't engaging. Thanks for all the help again willie
  10. U

    Bobcat T190 Park Brake

    Yes that's correct willie you can just get in and move it. That's what I was thinking its as if the springs were gone is what its acting like and I thought no way but weirder things have happened. Im going to try what you said about the brake valve. At this point I want to try anything to trick...
  11. U

    Genie Z45/25J Lift operates from ground but not from platform. Drive works.

    Hey buddy if your still working on this could you tell me if this just happened over night or did you change something?
  12. U

    JLG 450A will not run

    Hey buddy if your still working on this tomorrow I can take a look at the machine I have in the shop. Pretty sure its the same as this one. Another thing is it propane capable to? Cause one thing I ran into on one of these machines is that the switch in the basket to turn from fuel to propane...
  13. U

    Genie z45/25 steering issues

    Hello sorry I am a little late here but if you are still on the machine I can help you out. I can get you a diagram probably by tomorrow. Something that comes to mind on the joystick, did you calibrate it after installation?
  14. U

    Bobcat T190 Park Brake

    Hey guys I am new to this forum and from what I've seen looks like a very good one I hope to help out anyone I can in the future and hope someone could help me out. Have a T190 sn 531615935, with pedal controls also. I can't get the park brake to work. Fuses and relays are good. Has no codes...
  15. U

    Bobcat T190 Park brake

    All fuses and relays are good. Also has no codes at all.
  16. U

    Bobcat T190 Park brake

    Hey guys I am new to this forum and from what I've seen looks like a very good one I hope to help out anyone I can in the future and hope someone could help me out. Have a T190 sn 531615935, with pedal controls also. I can't get the park brake to work. Has new switch. Switched out ecu by your...
Top