• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. M

    Land Clearing

    road work The big rock should help as a base cover it with 6" minus to level it then road base and 3/4 minus .you may want to put culvert where it puddles now .you should end up 12"-18" above grade this will. Help the road dry out faster. . Ditching on the up hill side to direct the water not...
  2. M

    still looking for a solenoid for wain roy bidirectional valve

    the original coil is cast in resin and a crimp fit sleeve holds the unit together and pressure tight to 3500 psi. we tried the coil over becouse the original was only 3/8 thick we hoped there was enough magnetic pull to activate it it is only a poppet type valve that pushes open a spool...
  3. M

    wanted magnetic solenoid valve

    we need a solenoid valve for a wain -roy m327 bi directional circuit valve for a JCB 217 .they were used on JD, cat ford and many other types of equipment . for extra power points like clam bucket . hammer , articulate dig bucket ect. we will take used working one,s if new is not out...
  4. M

    still looking for a solenoid for wain roy bidirectional valve

    it is a sealed unit we tried to use a larger coil over the bad one no luck this is not our first rodeo. we have made our own coils befor even have recharged the magnets in some old magneto ignitions . this is not a repairable unit . we tried to get parts from england and austraila...
  5. M

    JD 500c starting problem.

    try jumping the starter direct. bypass the solenoid relay if it turns over replace the relay if not take the starter out and try cleaning the armature first .check the brushes not to worn .
  6. M

    still looking for a solenoid for wain roy bidirectional valve

    This valve was used by every one. mine is in a JCB 217 for the articulate dig bucket but they were used by cat, JD ,ford ect for the extra attachments like clam bucket . hammer ect. we posted the valve diagram no replys some one must have one some were ? it is 12v normaly closed looks...
  7. M

    JCB 217 with Wain-Roy biderectional valve parts issue

    sorry it took so long to get this to you needed grandkid's help.
  8. M

    JCB 217 with Wain-Roy biderectional valve parts issue

    we hope this helps with my search this was not as quickly posted as we wanted but the grandkids are hard to get to sit down and help grandpa unless they need some thing .
  9. M

    Land Clearing

    you got a job ahead of you. I would contact the enviormental or foristry people from your state as there are a lot of regulation as to working nere any moving water and big fines if you screw up . other than that do your self a favor and dig holes as deep as you can to put your stumps in this...
  10. M

    JCB 217 with Wain-Roy biderectional valve parts issue

    we will try that # with JCB dealer it may superseid the one I have 549/91---- the dealer told me I bought the last one in stock any place 5 yrs ago . so on the hunt we go . we heard from Keta yd they can make it for a crazy amount of $ they have a lot of them that were close but not going...
  11. M

    JCB 217 with Wain-Roy biderectional valve parts issue

    no but I'm willing to bet the solenoid's # 13 in diagram are the same mine has the solenoids facing opposing each othere to the right and left at the tires
  12. M

    JCB 217 with Wain-Roy biderectional valve parts issue

    have sent the dimensions out to many hyd. valve company's KETA HYD. had some that were close but not it I will try to post the dimensions with pics on this site . thanks
  13. M

    JCB 217 with Wain-Roy biderectional valve parts issue

    we have one of the Wain Roy extradig bidirectional circuit valves one of the 12v solenoids is not working we dismanteled it and the sealed magnet is no good . problem is evey place we call start laughing when I ask for the part . fallowed by good luck finding one . who ever made these for...
  14. M

    Cylinder seals. Dynahoe 1900

    I had the same problem with my 190 dinosor but a company Tri-power in warwick R.I. had no problem rebuilding them for me if you send the cyl. or the seals they will match them for you . there price was so good I had them reb uild them insted of doing .it my self.-give them a call 401-732-3390
Top