• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. D

    IH 520b engine swap

    The DT 466 engine is too long. A DT 360 might go in. I do have a d 310 which is a little brother to the 358 so all things will bolt in without changes. You would loose about 25-35 hp not noticeable unless doing serious digging. 580 512 3569
  2. D

    Quad track transmission

    On the agtalk forum Fla vegetable farmer gave some tips on making those tranniees live. Memory says 5 extra gallons of oil at 1500-2000rpm and put pressures around 275. This is from memory and I have slept numerous times since he posted the info.
  3. D

    Cat 416B will not move

    Update: Cat service rep from OKC said to check the electric solenoid tranny dump and when we pulled the solenoid and plunger the plunger was a tad ruff so with some 3000 grit headlight lens sand paper we smoothed the plunger up and all is well now. Thanks for the help.
  4. D

    Cat 416B will not move

    Went to use the hoe today and it will not move in any direction. Tranny fluid seems to be full (checked thrice). Worked great 3 weeks ago but nothing today. The neutralizer valve has power at all times so I unhooked the electric going to it but still no move. A wiring diagram would be nice to...
  5. D

    644E transmission problem

    Most likely the shift lever, not ZF greatest engineering. If not the rotary shift knob most likely a solenoid or wiring problem.
  6. D

    Cat 416B " clunk"

    Found the problem After pulling all of the front end apart we found that the front wheel drive PTO had came partially apart and we had a clutch pack housing running under the transmission gears. We repacked the cluches and seals along with acouple of nuts and are back to rolling.
  7. D

    Cat 416B " clunk"

    Thanks, will check in AM. The noise is when it is moving but will look for loose parts.
  8. D

    Cat 416B " clunk"

    Son just bought a 416B cat backhoe after using it for about an hour it seems to have a clunking sound along with a jumping action on the drive shaft going to the front rear end (4X4). Anyone got any experience with this or any ideas? My thoughts are that something is broke in the front...
  9. D

    Anybody got a JD 644c trans dipstick?

    dipstick length Hot is 47.t-49inches. Cold is 49-50.5 inches. Remember to check the tranny while machine is running
  10. D

    Fiat -Allis engine swap

    I Have an FR12B loader which has a 90hp engine instead of the original 140hp engine and was planning to put a 6BT cummins in its place. Will I be better off going to 24 volt on the engine or converting everthing else to 12 Volt?
  11. D

    FR 12B electrical

    Have a fr12b which has a marginal (size-wise) iveco motor(short of ponies). Want to convert to a 6BT cummins. My question is are the tranny solonoids 24Volt as the original starter WAS 24v AND I suspect all gages and tranny controls to be 24. May be easier to go with a 24 volt alenator and...
  12. D

    Allis Chalmers 260EA hydraulic pump --where to find

    Replacement pump My first choice would be Tejas Hydraulics in Longview,tx 800 256 2083. Great folks to work with. and very knowlegeable. They will need the nos. on the pump and most likely build one on sight.
  13. D

    International loaders 515 and 520

    Was wondering which IH engines these 2 machines used. Anybody with any experience with either machine? TIA
  14. D

    International D-310 engines

    Have 2 nice running German D310 diesel engines asking $1500 each. Have starter and altenators. can be bought with fuel tank and radiator as a power unit.
  15. D

    Massey 44b wheel loader

    Believe it is a clark tranny. Had a 55 and except for no brakes it was a decent loader as it had had a very hard life.
  16. D

    862 john deere scraper engine swap???

    Check the length Don't know about this particular swap but will give a few suggestions: (1)check length of frame to see what will go in the hole without frame lengthening, (2) see if the 619 has an industrial SAE type flywheel housing (makes adopting to the tranny a lot easier), (3) how is the...
  17. D

    Cat IT28F

    Can anyone tell me which engine is in this machine and what horse power? What is an open rops machine worth with bucket and quick attach unit?
  18. D

    Looking for Loader Bucket

    Looking for a GP bucket for a Clark 35C. Have a highlift rollout bucket I might trade.
  19. D

    clark 35C wheel loaders

    noisey, easy starting 3-53 detroit engine, tuff as they come and very dependable.
  20. D

    D282 help

    The 560 farmall, the 660 international, the early 706 tractors, the 416 cotton pickers used this engine . I believe it has the same block as some of the gas engines. Know where a 560 is that need o-haul for about a grand.
Top