• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. B

    Anyone want almost fully rebuilt but was in a flood case680e near 97801

    I bet it will still be a great machine but with no land I don’t really have a use for it
  2. B

    Anyone want almost fully rebuilt but was in a flood case680e near 97801

    It’s all fresh water and zip will be near 97801. The shuttle was taken out taken apart and has all new parts for it in a box but was in the shop when the shop flooded out I just don’t have the time to accomplish everything I want to do
  3. B

    Anyone want almost fully rebuilt but was in a flood case680e near 97801

    I drain the oil Already fuel tank seems to have came out out I screwed the Expanding plug fuel cap pretty good. Hide system was fully sealed and has brand new fluid in it since I completely took everything apart and cleaned it before the flood. Long story short I’m kind of being forced to...
  4. B

    Ec210 boom cylinder rebuild TQ specs

    It’s leaking pretty good thinking about rebuilting it as a I’m getting low balled while trying to sell it .
  5. B

    Anyone want almost fully rebuilt but was in a flood case680e near 97801

    I rebuilt all cylinder and hoses and engine and transmission. Shuttle was in the rebuild process when the flood hit . The flood has burnt me out I’ve dump 12k in the thing is would have been mint when Done . Guessing new engine and shuttle or maybe taken engine apart and clean . Was...
  6. B

    Anybody own a DD16 engine ? Good the bad ?

    Wow thank you for all that . Have you ever done a rebuild on one of those engines. Easy to get parts for. Or is this not a widely used engine ?
  7. B

    Anybody own a DD16 engine ? Good the bad ?

    It’s in a 2013 freightliner I’m gonna go look at it sometime this week. 550hp DD16 13k front 46k duals about 205 long . It’s got a 10 speed in it which I don’t love but it’s in my price range.
  8. B

    Anybody own a DD16 engine ? Good the bad ?

    Looking at getting a repaired salvage truck tractor with a DD 16 engine what’s the pros and the cons. anyone own one?
  9. B

    The cutting edges on my rock bucket keep coming loose . Tack weld ?

    Yeah I’m using a three-quarter impact. They’re metal interference nuts but the top of the nut with the crimp is where it wears off first. there 12.9 grade bolts but I never checked the holes. But the nuts do look cheap
  10. B

    The cutting edges on my rock bucket keep coming loose . Tack weld ?

    I tighten them up again and thinking of tack welding them ? Also do any of your hard face a v in front of the nut side to help from wearing the nut and threads off? the locking edge of the nut wears off first
  11. B

    Does a Volvo 2007 ec210 Excavator heaven in tank hydraulic filter? What’s the part number ?

    If I didn’t let fluid fly out of the open bolt hole it would have been spot on after I got the air out but now I have to open another 55 gal drum for 5-7 gals .
  12. B

    Does a Volvo 2007 ec210 Excavator heaven in tank hydraulic filter? What’s the part number ?

    Well I filled the tank though the big sliver bolt on the top of the filter hold down plate. Took 55 gals started Machine up without the bolts in there to let the air escape bad idea fluid shot out of the hole like no other. Been bleeding air out got most out going to let it sit for a while...
  13. B

    Shrinking bores with heat

    yea that's the bolt i used one at work seems to be doing good
  14. B

    Shrinking bores with heat

    Get a rose bud torch heat it from 11 o’clock to 12 o’clock in a strip Not just a round spot . Then heat it at 6 then 3 then 9 then check it then heat the spots like 2/4/8/10 check again . The end should not be heat treat as it’s welded on the end of the shaft . they also make a...
  15. B

    Can you use a diesel transfer pump to pump as 46 hydraulic oil

    Copy will put the mr heater on the barrel. And give it a shot I’m open to taking breaks to to let the motor cool down.
  16. B

    Can you use a diesel transfer pump to pump as 46 hydraulic oil

    I have my diesel transfer pump I use for pumping out of my slip tank into the equipment I believe it is fill right. Push the little sliver button switch and it runs till you shut it off type. Think it will work to pump a 46 weight hydraulic oil out of the 55 gallon drum ?
  17. B

    Does a Volvo 2007 ec210 Excavator heaven in tank hydraulic filter? What’s the part number ?

    Ok thank you for all the help will do. Thinking about pulling off some of the leaking hyd lines before I refill it to.
  18. B

    Does a Volvo 2007 ec210 Excavator heaven in tank hydraulic filter? What’s the part number ?

    Copy will keep it upright and check it. Just drained the tank . Going to let it drip over night then pop the top and replace in tank filter . When I refill the tank with clean fluid is it worth while to try to get the old fluid out of the rams and stuff before it mixes with the new fluid...
  19. B

    Does a Volvo 2007 ec210 Excavator heaven in tank hydraulic filter? What’s the part number ?

    whats the case drain filter for . i have a replacement i planned to replace
  20. B

    Does a Volvo 2007 ec210 Excavator heaven in tank hydraulic filter? What’s the part number ?

    The SN is 110985
Top