• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. bam1968

    Another old truck

    I think that is a KB. The only reason I say that is because of the grill (unless it has been changed). There are holes to mount the chrome strips. AFAIK all of the K models had a plain grill (no chrome). I have a KB-1 that I put a center grill off of a K-1 on. So I know they were...
  2. bam1968

    977L 11K machine vs 977L 14k machine

    I'm 99% sure that the machine pictured above is not a 14X machine. All of the 14X S/N machines that I have seen have a different hyd tank. Also look at the steering pedals. The pedals on the 14X machines pivot up behind the dash vs going down through the floor on the older machines.
  3. bam1968

    Building a Lake

    From your description you say it won't turn left but when pushing the left pedal the machine basically stops. Is that correct? If your left clutch/brakes were not working the machine should just keep moving straight forward and not try to turn. Basically the right track should keep moving.
  4. bam1968

    Building a Lake

    As MG84 said, anything over 150 ft it needs to be hauled. You mentioned the dirt is within 200 yds, if that is the case you need to be looking at a scraper in my opinion. With a scraper you can load, haul and compact the fill with one machine. Do you have a creek feeding your lake? If so how...
  5. bam1968

    TL150 TAKEUCHI SKIDSTEER WON'T START

    I'm guessing you are not getting power to your fuel shut off solenoid or the solenoid itself is bad.
  6. bam1968

    Drainage Question - Tile Vs. Ditch / Swale

    From your pic it looks like tree roots might be the cause of your problem. They will plug a tile in a surprisingly short amount of time.
  7. bam1968

    Should I rent or buy?

    How big are your stumps? In my neck of the woods I wouldn't want anything smaller than a D6 size machine to efficiently do any clearing. I can't even come close to renting that size machine for $4-5K a month here. If you can rent a D6 size machine for $4-5K for a month I would prob jump all...
  8. bam1968

    Cummins Fined $1.6 Billion Over Allegations It Outfitted Dodge Rams With Software To Cheat Emissions

    IDK...... Look up Toyotas 'water engine'. Looks like they might be getting close to getting it figured out.
  9. bam1968

    PITA pond

    My initial thoughts are that they didn't put a core trench in under the dam when they built it and the water is simply seeping under it. I have seen this happen too many times.
  10. bam1968

    Dozer vs Track Loader

    Have a bucket for it as well. Works good for for my needs.
  11. bam1968

    Not-for-hire hauling of CTL's

    Years ago I was sitting in the passenger seat of a local DOT's car. He was trying to decide which violations he was going to give me tickets for vs written warnings. He happened to mention that I wasn't long enough to 'bridge' the what ever weight I had on. To try to lighten the mood a little...
  12. bam1968

    Strange, interesting and funny stories buying and selling equipment

    I had an experience of 'Don't judge a book by it's cover' I had a cummins N14 engine that I wanted to sell 4 or 5 years ago. My son put it on FB Marketplace with pics and a video of it running IIRC he put a price of $8,000.00 firm. A couple days later a guy was coming from about 5 hours away...
  13. bam1968

    Cost of Owning vs Renting vs Hauling equipment

    Do you move your cat D6R with a dump truck and pintle trailer? I'm not implying that it's not legal but I have not seen it done. I feel like if I tried that around here the DOT would have me pulled over in very short order.
  14. bam1968

    Komatsu PC200- 7

    I'm far from an expert but I have a PC200 LC-7 and have a little understanding of them. As far as your boom hydraulics that could be a number of things. As Entropy1 said manuals are a very good investment. For your tracking problem.... Does it speed up when you activate another function...
  15. bam1968

    My balls are wearing out

    Maybe swap sides or turn them 180 degrees and build up the worn areas with weld??
  16. bam1968

    Cat 955H belly pan installation.

    The flat belly pans are a cake walk compared to the ones that sit up there at an angle.
  17. bam1968

    USDOT # and IFTA for non commercial use?

    Years ago I loved hauling cattle across those southern states. In Alabama if I was under 85,000 lbs would just hand the scale master $25 and keep on truckin. IIRC we bought 30 day 'harvest permits' that let us go 84-85,000 lbs in mississippi and louisiana for a few dollars. Hell I wouldn't...
  18. bam1968

    Dump truck help

    Gotta give credit to the welders!!!
  19. bam1968

    Anyone ever attached teeth to a speed mover?

    I can't remember the brand name but my neighbor has one with a hydraulic ripper bar. He is happy with it. Not only can it rip hard spots but the extra added weight helps it hold grade better as well.
  20. bam1968

    Repairing, cleaning and restoring large transfer tanks

    Evidently I am a slow typer. You could still use a 500 gal propane tank and set it in your dumper.
Top