• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. S

    Vermeer rtx 1250

    Ok...all done...I had decided the new cylinder must be defective and started to remove it. When I pulled the male fittings from the cylinder I found one to be orificed and plugged solid...with a torch tip cleaning tool I got it up and running. I called vermeer and they said the hydraulic...
  2. S

    Vermeer rtx 1250

    On the belly of the machine near the front drive yoke is a splitter valve that allows you to use the same control for two purposes...right and left....and the tilt right and tilt left by hitting the button supplying voltage to the splitter coil and valve. So I bypassed the splitter valve first...
  3. S

    Vermeer rtx 1250

    Yes reversed the lines and got the problem reversed.....I don't know how but I'm guessing a line is pinched closed where I can't see it.
  4. S

    Vermeer rtx 1250

    I wish I did...and vermeer is more tight lipped than any company I have ever seen.
  5. S

    Vermeer rtx 1250

    Hi all....I have a 2013 vermeer rtx 1250 and 1 problem that has eaten my lunch. Every hydraulic function on the machine works except the backfill blade tilt down right side. I have rerouted the lines to bypass the splitter valve and still nothing. Also replaced the cylinder...still no joy....any...
  6. S

    Genie 45 22 low idle

    Hi all, I have a 97 genie man lift with a low idle problem .....when you toggle to low idle it goes to high idle just the same as if you toggle to high idle....I replaced the ground switch but no difference and no change from gasoline to propane. Any ideas?
Top