• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. pasinead1991

    KOBELCO SK 210 -6E

    Hi everyone I have a problem with a kobelco sk210-6 when arm is all the way out it falls back in but only if all the way out otherwise function is normal
  2. pasinead1991

    ZX290-5N no throttle response

    Hi everyone I have a ZX290-5N with no throttle response I replaced control panel with control dial in all one unit and still no throttle response checked all wiring all seems good check voltage at dial only have 2.4 volts where I should have 5 volts. it dose not use a cable and stepper motor. Is...
  3. pasinead1991

    Cat 325C

    Hi everyone I’m working on a cat 325 c that has no hi idle and won’t slew checked all pressure switches. Monitor gauges come on with key on and then won’t read anything it starts monitor says ECM error. There are 2 ecu s behind the cab one has lights come on red yellow and green then red hose...
  4. pasinead1991

    973 C track machine

    Hi everyone I posted before that track machine wouldn’t rotate it’s self after installing new head on left drive motor problem was there were no shuttle valves in the new head swapped them out from old one and resssemble and now works good thanks for the help.
  5. pasinead1991

    Track loader

    Hi every one had a problem with 973C loosing pressure when turning 360 left or right turned out to be a crack in the head of the left drive motor repaired and now no more trouble codes machine works good but when turning sharp left or right the left track didn’t seem to be getting the same power...
  6. pasinead1991

    973c sluggish on one side.

    Hi every one had a problem with 973C loosing pressure when turning 360 left or right turned out to be a crack in the head of the left drive motor repaired and now no more trouble codes machine works good but when turning sharp left or right the left track didn’t seem to be getting the same...
  7. pasinead1991

    973C How to clear diagnostic trouble code

    Hi everyone my name is Patrick I was wondering if anybody could tell me how to clear trouble calls on the 973C. Thanks.
  8. pasinead1991

    973C oil pump.

    Hi I was wondering if someone could help me with oil pump on a 973C with a 3306 cat engine oil pump seems to have two pumps assemble together on my I'll pump back section of that I'll pump has a suction pipe that sucks oil when the engine is going down a steep grade forward but the exhaust side...
  9. pasinead1991

    973 track loader no reverse on right side

    Hi everyone I have a 973 track loader that will not reverse on the right track motor a check by pressures I'm getting no pressure on the Rivese side I pulled out the axel and I can see the shaft turning when in forward and jotting when in reverse. The motors have been changed and transmission...
  10. pasinead1991

    973c

    I'm working on a 973ctrack loader The right side track will not turn on at all even with machine off of the ground I replace the right side drive motor pump two weeks ago worked very well onto last night just stopped turning any ideas please I have no trouble codes at all my charge pressure is...
  11. pasinead1991

    973

    Hi everyone my 973 has been getting very slow with the bucket functions up and it will not tilt the bucket up now well serviced oil and filters regulary where can I check pressures thanks.
  12. pasinead1991

    973 track loader pressure taps.

    Hi I was wandering if anyone could tell me what the pressure taps on the valve body on the trany are for and what pressure I should have on them. She is the old style with 3 taps on top facing up and 3 facing forward and 1 facing to the right thanks.
  13. pasinead1991

    973C charge pressure

    Hi everyone 1 have a 973c with light coming on for charge pressure and then machine stops where can I check the pressure. Also light only comes on when you put it into forward or reverse high or low idle. 2 codes were loved non active 079 299-13 which I think is for forward and reverse lever...
  14. pasinead1991

    973C track speed faster on rite than left.

    Hi everyone I'm working on a 973C loader and the speeds are not the same on tracks. The machine got the drive pumps rebuilt I put them in and they not even when going straight pulls left when going forward and rite in reverse. Also if I put it in park and then try to move again I get notting and...
  15. pasinead1991

    Pa

    I have a problem with a 973 older model when warm moves very slow.The rite track seems strong on turns but the left is dead when sitting at an idle i hear a surging from the trany and a thud like sound from left track .im thinking a bad track motor . i removed the top cover from the trany and...
Top