• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. P

    Ex bins and bushings

    We carry most of the bucket pins & bushings for the 160. We can also provide you with teeth. Constructionpartshq.com
  2. P

    Koehring 6620 service manual.

    Service manual. Needed to buy, borrow or steal. SN 172132. Contact me at steve@sadygerts.com or by phone at 315-559-4992
  3. P

    Allis Chalmers WM

    Allis Chalmers WM crawler. Looks to be all original with exception of fenders. Good undercarriage. Engine turns over but have not attempted to start. Hand crank with option for electric starter. Engine block is cracked on outside of water jacket behind carb. Overall very nice condition. Perfect...
  4. P

    Service Truck & Service Body For Sale

    2000 Freightliner FL70 service truck. 33K GVW, air brake truck. CDL required. Powered by CAT 3126 and 9 speed fuller. Rust free truck and body from Arkansas. Never been in the salt. Good rubber. Crane & crane equipment in pictures NOT included and NOT for sale.Body is 15' 10" overall length...
  5. P

    2 150 Ton Track Presses

    Selling my track presses. I have 2 150 ton Rodgers presses alsmost identical. One is fully operational, the other could be made to work, used as a parts machine OR made into a portable press. Also included is a large lot of Cat, Allis Chalmers, IH and John Deere tooling. Asking $5500 for...
  6. P

    Komatsu D31P-18 Need help id'ing the year, etc....

    Sorry for the delay Kevin. I don't have time to get on here much anymore. Based on your serial # and my book it appears to be a 2005. 2005 starts at 5111 and 2006 starts at 5715.
  7. P

    IT18F brake pressure

    Thanks guys for your input. However I have run with tank cap removed and still have pressure at brakes. In addition since this post was made, I have determined that the pressure increases with engine rpm's. I have isolated the source of this oil to either the accumulator charge valve or the main...
  8. P

    IT18F brake pressure

    Have a CAT IT18F with worn out brakes. Wondering what if any residual brake pressure is acceptable after releasing pedal? I have a constant 30 Lbs.
  9. P

    450b steering brakes

    TM-1033 should be the service manual for 450B. Steve. www.sadygerts.com Check ebay too.
  10. P

    450 trans problems

    Transmission comes out the rear. I find it easiest to pull final drives off after transmission is out. Like sheepfoot says, keep track of shims. They are located between final drives and transmission housing and at shaft bearing locations. AND Get the books!! If you have questions or need...
  11. P

    450b steering brakes

    Unlikely you'll be able to do it correctly without pulling clutch. The spring in the bottom will be impossible to get at to install I think. If you have other questions or need parts feel free to contact me here in NY. Steve. www.sadygerts.com
  12. P

    Need help with komatsu d21 with 4d95s-w-1 engine

    I have a listing for overhaul kits and other parts for that machine. Give me a call and I'll be glad to quote you. Will need full model and serial numbers for both the tractor & engine. Steve. www.sadygerts.com
  13. P

    350B engine and drivetrain rebuild

    We have the 188D kits available. Reliance brand. Quality parts and comparable pricing. We use them here in our shop and sell across the country and have never had an issue. Give us a call. 315-288-5307http://www.sadygerts.com
  14. P

    D6c exhaust pipe help

    Elbow available new aftermarket. Call for more information. Steve. www.sadygerts.com
  15. P

    Komatsu D31 Dozer Will Not Move

    rick6003.......D31A is not hydrostatic. Malcolm2......I had a very similar problem with a Cat D3B. Try running it without the suction screen. Let me know if that works. Steve. www.sadygerts.com
  16. P

    Help with D3 Cat

    Yes I have checked the screen. Also checked and replaced the O-rings on the suction tubes. After reading the theory of operation, it appears that the oil coming from the hole is correct. This oil is leftover from the modulating valve and is returned to sump via that hole. So I am still at a loss...
  17. P

    Help with D3 Cat

    I had the same thoughts. However, the problem existed before the valve was disassembled. I have the book on it and am studying the operation.
  18. P

    Help with D3 Cat

    It seems as if a valve is opening prematurely and allowing oil to dump back into the sump. However all of the springs in the valve body were replaced prior to me getting the machine including the relief valve in the manifold. I had hoped that someone assembled something wrong when putting back...
  19. P

    Help with D3 Cat

    Help with D3 No it's not threaded.
  20. P

    Help with D3 Cat

    Have D3 cat 79U. Transmission pressure drops as soon as throttle is jacked up. With top cover removed, oil is spraying out of small 1/4" hole in the top of the valve body at the right hand end. This is at the load spool. Any ideas anyone?
Top