• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. sfrs4

    2002 EC360BLC S/N 10284 WILL START AND DIE INTERMITTENTLY Please Help

    Could the fuel cut off solenoid on the fuel pump be playing up? wiring issue or hopefully not an ECU fault
  2. sfrs4

    This will be an interesting thread moving forward......

    To add to what Colson put, it gets worse when poor management can't deal with underperforming staff so the easiest way to remove the problem from their area is to promote them away to be someone else's problem. hence they will then end up in a management position way above their ability
  3. sfrs4

    This will be an interesting thread moving forward......

    Been saying this for years, we all thought it was a parody film, turns out it was documentary left by a time traveller to try to stop it from happening...We failed.
  4. sfrs4

    Volvo L120H Emission codes

    So all those codes are loss of communication with various Ecu's and control modules. it might be that plugging them all back in again and re reading the codes will wipe them, it could be that the " GUY " has turned off the CanBus system to each ECM ECU etc so it doesn't read anything at all.
  5. sfrs4

    Genuine VS Chinese parts

    So my first question is this... Chinese or Asian? The reason I ask is simple, a lot of really good excavators out there are Korean and parts are made in Korea. As for the Chinese market my 2 cents worth on this, a lot of stuff for manufacturers is now made in China and Turkey, these two...
  6. sfrs4

    Front driveshaft needed

    So to add to what I put earlier and add to Nigel and truck shop have intimated at The A30C is a very solid and robust truck, so much so that we don't tend to sell half of much parts wise for these old girls compared to the A25C 's of the same age, with that though comes the caveat, when...
  7. sfrs4

    Order assembled chains and pads or transfer? Ec140blc

    @RTS8809 this should help, for some reason the diagram of which to tighten in order is missing
  8. sfrs4

    Front driveshaft needed

    Hi Ianjoub so you are looking for a complete propshaft, alot of people won't sell them good used anymore, because if they let go after a few weeks, you're going to be screaming and when they go they tend to take something else out with them which will cost even more, I don't know what they cost...
  9. sfrs4

    Suspected egr cooler volvo a30g

    Not something i've heard of failing. Look at injector sleeves first, it its using water are you replacing with just straight water or proper VCS and water mix?
  10. sfrs4

    Volvo a40d hydraulic break pressure issue.

    Hi 4digger try this...
  11. sfrs4

    This will be an interesting thread moving forward......

    Ok, so after reading the last few pages a few times over, it's a no brainer, the only way you make them even half listen is to go all the way to the top. " Sorry I won't be selling out to you, as for the last month all they have done is prove what a schit show the management is" and explain...
  12. sfrs4

    Volvo L90E help!

    As 8V71 says its more than likely your TPS. it is possible to check it as shown.
  13. sfrs4

    Business is slow this season

    Is it worth speaking to the landlord, some are ok, some are heartless. If you've been a good tenant that pays on time and hasn't trashed the building, then they might be open to negotiation on rates, I'd rather receive less rent with less hassle and payments regular, than more money but more...
  14. sfrs4

    Volvo L70E vs L70F 03-07’

    Things will be a little more " ironed out" by the F series as it is basically an E with more stringent emissions controls in place.
  15. sfrs4

    Volvo L70E vs L70F 03-07’

    In what way? the engine is a tier2 in the E and a tier3 in the F, after that a lot of the differences you see can easily be attributed to what the first customer specified on the options lists for their machine from factory.
  16. sfrs4

    Cover the exhaust when transporting machine to protect turbo???

    So basically minimal flow of air then, the air would enter the turbo through the exhaust side and hit the exhaust valves in the head with valves in the a small amount would pass the valve but nowhere near enough to make the exhaust side spin in the reverse direction at any sort of speed that...
  17. sfrs4

    Cover the exhaust when transporting machine to protect turbo???

    I'm probably wrong here but... surely you need air FLOW to make a turbo spin? if you are getting a flow of air through the turbo with enough force it to spin at a speed that will damage a turbo ( even prolonged steady spinning will be fine with the residual oil on the bearing surfaces), you have...
  18. sfrs4

    1998 Moxy MT30S parking brake chamber, looking for an aftermarket alternative to OEM part# MX153211

    Errr check Volvo, that looks suspiciously like 11049401 park brake chamber, which in the UK as a genuine part is less than half your Moxy part, and I have an OEM aftermarket one for half genuine price, the only difference could be the mounting threads could be a little different
  19. sfrs4

    Overload of the Day

    And anything you can do the Irish can do better, https://vm.tiktok.com/ZGeLhYMEw/ I think one of the trailers might have hydraulic brakes and the Ford will have some form of rear axle brakes
  20. sfrs4

    Volvo excavator foot valve

    hope these help Mason
Top